Call us: +86 0755-82563503

Currency: $ US Dollar

Items : %s%s

  • SN74AHC374DGVRG4

SN74AHC374DGVRG4

advertisement

Manufacturer No:

SN74AHC374DGVRG4

Manufacturer:

Texas Instruments

HK JDW NO:

815-SN74AHC374DGVRG4

Package:

20-TFSOP (0.173, 4.40mm Width)

Datasheet:

SN74AHC374DGVRG4

Description:

2V~5.5V 120MHz 8 Bit D-Type Flip Flop DUAL 74AHC374 20 Pins 4μA 74AHC Series 20-TFSOP (0.173, 4.40mm Width)

Quantity:

In Stock : 999

Share

Please send RFQ, we will respond immediately.

* Contact Name

* Business Email

* Company Name

* Country

* Quantity

Product Details

Purchasing and Inquiry

SN74AHC374DGVRG4 Overview


The flip flop is packaged in 20-TFSOP (0.173, 4.40mm Width). It is contained within the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. The supply voltage is set to 2V~5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74AHCseries contain this type of chip. Its output frequency should not exceed 120MHz. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current. A total of 20 terminations have been made. The 74AHC374 family contains it. Power is supplied from a voltage of 3.3V volts. The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the AHC/VHC/H/U/Vfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. The 20pins are designed into the board. In this device, the clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The design is based on 8bits. The maximal supply voltage (Vsup) reaches 5.5V. Normal operation requires a supply voltage (Vsup) above 2V. As a result of its reliability, this D flip flop is ideally suited for TR. The system runs on a power supply of 2/5.5V watts. There are 2 ports embedded in the flip flops. It offers maximum design flexibility with its output current of 8mA. Currently, there are 8 lines of input.

SN74AHC374DGVRG4 Features


Tape & Reel (TR) package
74AHC series
20 pins
8 Bits
2/5.5V power supplies

SN74AHC374DGVRG4 Applications


There are a lot of Texas Instruments SN74AHC374DGVRG4 Flip Flops applications.

  • Frequency Dividers
  • Bounce elimination switch
  • Bus hold
  • Computing
  • Set-reset capability
  • Power down protection
  • Dynamic threshold performance
  • Memory
  • Single Down Count-Control Line
  • CMOS Process
1. Purchase

You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.
EmailEmail for receiving inquiries: jindawei@hkjdwchip.com

2. Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

3. RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

4. Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.

Purchasing and Inquiry

Payment Method

The fee is charged according to the rule of PayPal.
East West Bank charge US$30.00 banking fee.
The fee is charged according to the rule of PayPal.
Western Union charge US$0.00 banking fee.

Shipping

DHL(www.dhl.com)
From $40.00 basic shipping fee depend on zone and country.
UPS(www.ups.com)
From $40.00 basic shipping fee depend on zone and country.
FedEx(www.fedex.com)
From $40.00 basic shipping fee depend on zone and country.
Registered Mail(www.singpost.com)
From $10.00 basic shipping fee depend on different zone and country.

Package

Product
Step1Product
Casing drivepipe
Step2Casing drivepipe
Anti-static bag
Step3Anti-static bag
Packaging boxes
Step4Packaging boxes
Bar-code shipping tag
Step5Bar-code shipping tag

SN74AHC374DGVRG4

technical specifications, attributes, parameters and parts with similar specifications to SN74AHC374DGVRG4.

  • Type
    Parameter
    Select All
  • Mount

    Surface Mount

  • Mounting Type

    Surface Mount

  • Package / Case

    20-TFSOP (0.173, 4.40mm Width)

  • Number of Pins

    20

  • Weight

    60.186038mg

  • Operating Temperature

    -40°C~85°C TA

  • Packaging

    Tape & Reel (TR)

  • Series

    74AHC

  • JESD-609 Code

    e4

  • Pbfree Code

    no

  • Part Status

    Obsolete

  • Moisture Sensitivity Level (MSL)

    1 (Unlimited)

  • Number of Terminations

    20

  • Type

    D-Type

  • Terminal Finish

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Subcategory

    FF/Latches

  • Packing Method

    TR

  • Technology

    CMOS

  • Voltage - Supply

    2V~5.5V

  • Terminal Position

    DUAL

  • Terminal Form

    GULL WING

  • Peak Reflow Temperature (Cel)

    260

  • Supply Voltage

    3.3V

  • Terminal Pitch

    0.4mm

  • Base Part Number

    74AHC374

  • Function

    Standard

  • Output Type

    Tri-State, Non-Inverted

  • Number of Elements

    1

  • Polarity

    Non-Inverting

  • Supply Voltage-Max (Vsup)

    5.5V

  • Power Supplies

    2/5.5V

  • Supply Voltage-Min (Vsup)

    2V

  • Load Capacitance

    50pF

  • Number of Ports

    2

  • Output Current

    8mA

  • Number of Bits

    8

  • Clock Frequency

    120MHz

  • Propagation Delay

    16.2 ns

  • Turn On Delay Time

    1 ns

  • Family

    AHC/VHC/H/U/V

  • Logic Function

    D-Type, Flip-Flop

  • Current - Quiescent (Iq)

    4μA

  • Output Characteristics

    3-STATE

  • Current - Output High, Low

    8mA 8mA

  • Max Propagation Delay @ V, Max CL

    10.1ns @ 5V, 50pF

  • Trigger Type

    Positive Edge

  • Input Capacitance

    4pF

  • Number of Input Lines

    8

  • Clock Edge Trigger Type

    Positive Edge

  • Max Frequency@Nom-Sup

    75000000Hz

  • Length

    5mm

  • Width

    4.4mm

  • Radiation Hardening

    No

  • RoHS Status

    ROHS3 Compliant

  • Lead Free

    Contains Lead

Hot Sales in Thermal

SN74AHCT74QDRG4Q1

SN74AHCT74QDRG4Q1

SN74AHCT74QDRG4Q1

74LVC109D,118

74LVC109D,118

74LVC109D,118

74HCT273N,652

74HCT273N,652

74HCT273N,652

74ABT74PW,118

74ABT74PW,118

74ABT74PW,118

54FCT374CTLB

54FCT374CTLB

54FCT374CTLB

74HCT574D-Q100,118

74HCT574D-Q100,118

74HCT574D-Q100,118

CD74HCT175MG4

CD74HCT175MG4

CD74HCT175MG4

MC100EP31DTR2G

MC100EP31DTR2G

MC100EP31DTR2G

TC74HC574AFW(ELP)

TC74HC574AFW(ELP)

TC74HC574AFW(ELP)

74LVC574ABQ,115

74LVC574ABQ,115

74LVC574ABQ,115

Parts with Similar Specs

The three parts on the right have similar specifications to Aavid.

  • Image
    Part Name
    Manufacturer
    HK JDW NO
    Package
    Stock
    DataSheet:
    Compare:
  • SN74S74N
    Texas Instruments
    815-SN74S74N
    14-DIP (0.300, 7.62mm)
    2-3 Days
    Add Compare
  • SN74LVC1G175DBVR
    Texas Instruments
    815-SN74LVC1G175DBVR
    SOT-23-6
    2-3 Days
    Add Compare
  • SN74LS273N
    Texas Instruments
    815-SN74LS273N
    20-DIP (0.300, 7.62mm)
    2-3 Days
    Add Compare
  • SN74HC174DR
    Texas Instruments
    815-SN74HC174DR
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • SN74HC74N
    Texas Instruments
    815-SN74HC74N
    14-DIP (0.300, 7.62mm)
    2-3 Days
    Add Compare
  • SN74HC273DW
    Texas Instruments
    815-SN74HC273DW
    20-SOIC (0.295, 7.50mm Width)
    2-3 Days
    Add Compare
index:  0 - 9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
Settings Need Help?
Top FAQ's

How can I quickly find answers to my questions?

Please visit the Help & Support area of our website to find information regarding ordering, shipping, delivery and more.

What is my Order Status?

Registered users can track orders from their account dropdown, or click here. *Order Status may take 12 hours to update after initial order is placed.

How do I return product?

Users can begin the returns process by starting with our Returns Page.

How do I find price and availability?

Quotes can be created by registered users in myLists.

How do I create a 'HK JDW' Account?

Visit the Registration Page and enter the required information. You will receive an email confirmation when your registration is complete.

United Kingdom/GBP Summary
Fast Shipping Fast Delivery

Orders are typically delivered to United Kingdom within 48 hours depending on location.

Free Shipping Free Shipping

Free delivery to United Kingdom on orders of £33 or more. A delivery charge of £12 will be billed on all orders less than £33.

Incoterms Incoterms

DDP (Duty and customs paid by HK JDW)

Payment Options Payment Types

Credit account for qualified institutions and businesses

Payment in Advance by Wire Transfer

Visa Mastercard American Express PayPal Apple Pay Google Pay

Marketplace Marketplace Product

More Products From Fully Authorized Partners

Average Time to Ship 1-3 Days, extra ship charges may apply. Please see product page, cart, and checkout for actual ship speed.

Incoterms: CPT (Duty, customs, and applicable VAT/Tax due at time of delivery)

For more information visit Help & Support