Call us: +86 0755-82563503

Currency: $ US Dollar

Items : %s%s

  • SN74ACT534N

SN74ACT534N

advertisement

Manufacturer No:

SN74ACT534N

Manufacturer:

Texas Instruments

HK JDW NO:

815-SN74ACT534N

Package:

20-DIP (0.300, 7.62mm)

Datasheet:

SN74ACT534N

Description:

4.5V~5.5V 100MHz 8 Bit D-Type Flip Flop DUAL 74ACT534 20 Pins 4μA 74ACT Series 20-DIP (0.300, 7.62mm)

Quantity:

In Stock : 999

Share

Please send RFQ, we will respond immediately.

* Contact Name

* Business Email

* Company Name

* Country

* Quantity

Product Details

Purchasing and Inquiry

SN74ACT534N Overview


In the form of 20-DIP (0.300, 7.62mm), it has been packaged. The package Tubecontains it. T flip flop is configured with an output of Tri-State, Inverted. Positive Edgeis the trigger it is configured with. It is mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis used as the supply voltage. It is operating at -40°C~85°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74ACT series. You should not exceed 100MHzin the output frequency of the device. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. There have been 20 terminations. Members of the 74ACT534family make up this object. An input voltage of 5Vpowers the D latch. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. ACTis the family of this D flip flop. In this case, the electronic component is mounted in the way of Through Hole. With its 20pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with a number of bits of 8. Its superior flexibility is attributed to its use of 8 circuits. The system runs on a power supply of 5V watts. The D flip flop has no ports embedded. Optimal efficiency requires a supply voltage of 5V. The output current of 24mA makes it feature maximum design flexibility. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

SN74ACT534N Features


Tube package
74ACT series
20 pins
8 Bits
5V power supplies

SN74ACT534N Applications


There are a lot of Texas Instruments SN74ACT534N Flip Flops applications.

  • Shift Registers
  • Bus hold
  • Storage Registers
  • Registers
  • Reduced system switching noise
  • Functionally equivalent to the MC10/100EL29
  • Control circuits
  • Computers
  • Single Down Count-Control Line
  • ESD performance
1. Purchase

You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.
EmailEmail for receiving inquiries: jindawei@hkjdwchip.com

2. Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

3. RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

4. Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.

Purchasing and Inquiry

Payment Method

The fee is charged according to the rule of PayPal.
East West Bank charge US$30.00 banking fee.
The fee is charged according to the rule of PayPal.
Western Union charge US$0.00 banking fee.

Shipping

DHL(www.dhl.com)
From $40.00 basic shipping fee depend on zone and country.
UPS(www.ups.com)
From $40.00 basic shipping fee depend on zone and country.
FedEx(www.fedex.com)
From $40.00 basic shipping fee depend on zone and country.
Registered Mail(www.singpost.com)
From $10.00 basic shipping fee depend on different zone and country.

Package

Product
Step1Product
Casing drivepipe
Step2Casing drivepipe
Anti-static bag
Step3Anti-static bag
Packaging boxes
Step4Packaging boxes
Bar-code shipping tag
Step5Bar-code shipping tag

SN74ACT534N

technical specifications, attributes, parameters and parts with similar specifications to SN74ACT534N.

  • Type
    Parameter
    Select All
  • Factory Lead Time

    6 Weeks

  • Lifecycle Status

    ACTIVE (Last Updated: 5 days ago)

  • Mount

    Through Hole

  • Mounting Type

    Through Hole

  • Package / Case

    20-DIP (0.300, 7.62mm)

  • Number of Pins

    20

  • Weight

    1.1991g

  • Operating Temperature

    -40°C~85°C TA

  • Packaging

    Tube

  • Series

    74ACT

  • JESD-609 Code

    e4

  • Pbfree Code

    yes

  • Part Status

    Active

  • Moisture Sensitivity Level (MSL)

    1 (Unlimited)

  • Number of Terminations

    20

  • Type

    D-Type

  • Terminal Finish

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Subcategory

    FF/Latches

  • Technology

    CMOS

  • Voltage - Supply

    4.5V~5.5V

  • Terminal Position

    DUAL

  • Peak Reflow Temperature (Cel)

    NOT SPECIFIED

  • Supply Voltage

    5V

  • Terminal Pitch

    2.54mm

  • Time@Peak Reflow Temperature-Max (s)

    NOT SPECIFIED

  • Base Part Number

    74ACT534

  • Function

    Standard

  • Qualification Status

    Not Qualified

  • Output Type

    Tri-State, Inverted

  • Operating Supply Voltage

    5V

  • Number of Elements

    1

  • Polarity

    Inverting

  • Power Supplies

    5V

  • Number of Circuits

    8

  • Load Capacitance

    50pF

  • Number of Ports

    2

  • Output Current

    24mA

  • Number of Bits

    8

  • Clock Frequency

    100MHz

  • Propagation Delay

    11.5 ns

  • Turn On Delay Time

    2.5 ns

  • Family

    ACT

  • Logic Function

    D-Type, Flip-Flop

  • Current - Quiescent (Iq)

    4μA

  • Current - Output High, Low

    24mA 24mA

  • Max I(ol)

    0.024 A

  • Max Propagation Delay @ V, Max CL

    11.5ns @ 5V, 50pF

  • Trigger Type

    Positive Edge

  • Input Capacitance

    4.5pF

  • Power Supply Current-Max (ICC)

    0.04mA

  • Number of Input Lines

    3

  • Count Direction

    UNIDIRECTIONAL

  • Clock Edge Trigger Type

    Positive Edge

  • Translation

    N/A

  • Height

    5.08mm

  • Length

    24.33mm

  • Width

    6.35mm

  • Thickness

    4.57mm

  • REACH SVHC

    No SVHC

  • RoHS Status

    ROHS3 Compliant

  • Lead Free

    Lead Free

Hot Sales in Thermal

SN74AHCT574NSRG4

SN74AHCT574NSRG4

SN74AHCT574NSRG4

CLVC374AQDWRG4Q1

CLVC374AQDWRG4Q1

CLVC374AQDWRG4Q1

74LV273PW,112

74LV273PW,112

74LV273PW,112

74LVC74AD,118

74LVC74AD,118

74LVC74AD,118

74HC175PW,112

74HC175PW,112

74HC175PW,112

SN74LVTH16374DLG4

SN74LVTH16374DLG4

SN74LVTH16374DLG4

MM74HCT273SJ

MM74HCT273SJ

MM74HCT273SJ

SN74HCS72PWR

SN74HCS72PWR

SN74HCS72PWR

74LVTH574PW,112

74LVTH574PW,112

74LVTH574PW,112

SN74ABT823DWR

SN74ABT823DWR

SN74ABT823DWR

Parts with Similar Specs

The three parts on the right have similar specifications to Aavid.

  • Image
    Part Name
    Manufacturer
    HK JDW NO
    Package
    Stock
    DataSheet:
    Compare:
  • SN74S74N
    Texas Instruments
    815-SN74S74N
    14-DIP (0.300, 7.62mm)
    2-3 Days
    Add Compare
  • SN74LVC1G175DBVR
    Texas Instruments
    815-SN74LVC1G175DBVR
    SOT-23-6
    2-3 Days
    Add Compare
  • NC7SZ74K8X
    ON Semiconductor
    598-NC7SZ74K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • SN74LS273N
    Texas Instruments
    815-SN74LS273N
    20-DIP (0.300, 7.62mm)
    2-3 Days
    Add Compare
  • 74HC74D,652
    Nexperia USA Inc.
    554-74HC74D,652
    14-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • SN74HC174DR
    Texas Instruments
    815-SN74HC174DR
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • MM74HC74AMX
    ON Semiconductor
    598-MM74HC74AMX
    14-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • SN74HC74N
    Texas Instruments
    815-SN74HC74N
    14-DIP (0.300, 7.62mm)
    2-3 Days
    Add Compare
  • SN74HC273DW
    Texas Instruments
    815-SN74HC273DW
    20-SOIC (0.295, 7.50mm Width)
    2-3 Days
    Add Compare
  • MM74HC273WMX
    ON Semiconductor
    598-MM74HC273WMX
    20-SOIC (0.295, 7.50mm Width)
    2-3 Days
    Add Compare
  • MM74HC175M
    ON Semiconductor
    598-MM74HC175M
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
index:  0 - 9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
Settings Need Help?
Top FAQ's

How can I quickly find answers to my questions?

Please visit the Help & Support area of our website to find information regarding ordering, shipping, delivery and more.

What is my Order Status?

Registered users can track orders from their account dropdown, or click here. *Order Status may take 12 hours to update after initial order is placed.

How do I return product?

Users can begin the returns process by starting with our Returns Page.

How do I find price and availability?

Quotes can be created by registered users in myLists.

How do I create a 'HK JDW' Account?

Visit the Registration Page and enter the required information. You will receive an email confirmation when your registration is complete.

United Kingdom/GBP Summary
Fast Shipping Fast Delivery

Orders are typically delivered to United Kingdom within 48 hours depending on location.

Free Shipping Free Shipping

Free delivery to United Kingdom on orders of £33 or more. A delivery charge of £12 will be billed on all orders less than £33.

Incoterms Incoterms

DDP (Duty and customs paid by HK JDW)

Payment Options Payment Types

Credit account for qualified institutions and businesses

Payment in Advance by Wire Transfer

Visa Mastercard American Express PayPal Apple Pay Google Pay

Marketplace Marketplace Product

More Products From Fully Authorized Partners

Average Time to Ship 1-3 Days, extra ship charges may apply. Please see product page, cart, and checkout for actual ship speed.

Incoterms: CPT (Duty, customs, and applicable VAT/Tax due at time of delivery)

For more information visit Help & Support