S9S12ZVL32F0MLCR

S9S12ZVL32F0MLCR                      Description

The MC9S12ZVL-Family is an automotive 16-bit microcontroller family using the 180nm NVM+UHV technology that offers the capability to integrate 40V analogcomponents.This family reuses many features from the existing S12 portfolio.The particular differentiating features ofthis family are the enhanced S12Zcore and the integration ofhigh-voltage”analog modulesincluding the voltage regulator(VREG)and a Local Interconnect Network(LIN)physical layer.

The MC9S12ZVL-Family includes error correction code(ECC)on RAMFLASH and EEPROM for diagnostic or data storage,a fastanalog-to-digitalconverter(ADC)and a frequency modulated phase locked loop(IPLLthat improves the EMCperformance.The MC9S12ZVL-Family delivers an optimized solution with the integration of several key system components into a single deviceoptimizing system architecture and achieving significant space savings.TheMCS12ZVL-Family delivers all the advantages and efficiencies ofa 16-bit MCU while retaining the low costpower consumptionEMC. and code-size efficiency advantages currently enjoyed by users ofexisting S12 families.The MC9S12ZVL-Family is available in 48-pin32-pin LOFP and 32-pin QFN-EPIn addition to the I/O ports available in each module,further I/O ports are available with interrupt capabilityallowing wake-up from stop or wait modes.

S9S12ZVL32F0MLCR                                Features

Phase locked loop (IPLL)frequency multiplier with internal filter

1MHz internal RC oscillator with +/-1.3%accuracyover rated temperature range4-20 MHz amplitude controlled pierce oscillator InternalCOP(watchdog)module

analog-to-digitalconverter(ADC)with 10-bit or 12-bit resolution and up to 10 channels available

on external pins and Vho(bandgap)resultreference·PGAmodule with two input channels

·One 8-bit 5V digital-to-analog converter(DAC)

One analog comparators(ACMP)with rail-to-rail inputs

MSCAN(1Mbit/sCAN 2.0AB software compatible)module One serial peripheral interface(SPI) module

One serial communication interface(SCI)module with interface to internalLIN physical layer

transceiver (with RX connected to a timer channel for frequency calibration purposes,if desired Up to one additional SCI(not connected toLIN physical layer)

One on-chip LIN physical laver transceiver fully compliant with the LIN 2.2 standard6-channel timer module(TIM0)with input capture/output compare2-channel timer module(TIM1)with input capture/output compare Inter-IC(lIC)module

8-channel Pulse Width Modulationmodule(PWM

On-chip voltage regulator(VREG)for regulation of input supply and all internal voltages Autonomous periodic interrupt(API),supports cyclic wakeup from Stop mode Pins to support 25 mAdrivestrengthtoVSSX

Pin to support 20 mAdrive strength from VDDX(EVDD) High VoltageInput(HVI)

Supply voltage sense with low battery warning

On-chip temperature sensor.temperature value can be measured with ADC or can generate a high temperature warning

S9S12ZVL32F0MLCR                          Applications

These features make the STM32F105xx and STM32F107xx connectivity line microcontroller family suitable for a wide range of applications such as motor drives and application control, medical and handheld equipment, industrial applications.