Call us: +86 0755-82563503

Currency: $ US Dollar

Items : %s%s

  • DG642DY-E3

DG642DY-E3

advertisement

Manufacturer No:

DG642DY-E3

Manufacturer:

Vishay Siliconix

HK JDW NO:

880-DG642DY-E3

Package:

8-SOIC (0.154, 3.90mm Width)

Datasheet:

DG642DY-E3

Description:

100ns, 60ns SPDT 8Ohm Analog Switches BREAK-BEFORE-MAKE DG642 8 Pins 10nA 15V 8-SOIC (0.154, 3.90mm Width)

Quantity:

In Stock : 999

Share

Please send RFQ, we will respond immediately.

* Contact Name

* Business Email

* Company Name

* Country

* Quantity

Product Details

Purchasing and Inquiry

DG642DY-E3 Overview


The electronic part can be shipped overseas conveniently because it is packaged in 8-SOIC (0.154, 3.90mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~85°C TA extended. 8 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. The electrical component body receives 8 pins. The analog switch ics are built using SPDT switching circuits. Using the DG642 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 15Ohm. To find out what the functions of 8 pins are, please refer to their datasheets. In this analog multiplexer, the value is Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 21V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. There should be 10V voltage fed to the electrical part below 10V. The analogue multiplexer could operate on 3.5mA current. A digital multiplexer may suffer damage if voltage is applied above 6mA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 15V. In the case of dual power supplies, you should connect at least 10V. It is integrated with AUDIO/VIDEO SWITCH analog ICs. The electrical part can be operated at 15V voltage levels. In order to operate the 1 inputs, there are several steps to follow. There are 500MHz bandwidths for data transfer. You shouldn't miss the additional features of the electrical component, such as: VIDEO APPLICATION. There is 8Ohm Drain to Source resistance on this electronic part. This digital multiplexer has 2 outputs.

DG642DY-E3 Features


1 Channels
Switch Circuit: SPDT
3.5mA Supply Current
Bandwidth: 500MHz
Additional Features: VIDEO APPLICATION
Drain-to-Source resistance: 8Ohm

DG642DY-E3 Applications


There are a lot of Vishay Siliconix DG642DY-E3 Analog Switches & Multiplexers ICs applications.

  • Cell phones
  • Cellular phones
  • Data Acquisition Systems
  • Microprocessor Controlled Analog Systems
  • Communication systems
  • SDH/SONET multiplexers
  • USB 1.1 signal switching circuits
  • MP3 players
  • Routers
  • DSLAMs
1. Purchase

You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.
EmailEmail for receiving inquiries: jindawei@hkjdwchip.com

2. Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

3. RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

4. Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.

Purchasing and Inquiry

Payment Method

The fee is charged according to the rule of PayPal.
East West Bank charge US$30.00 banking fee.
The fee is charged according to the rule of PayPal.
Western Union charge US$0.00 banking fee.

Shipping

DHL(www.dhl.com)
From $40.00 basic shipping fee depend on zone and country.
UPS(www.ups.com)
From $40.00 basic shipping fee depend on zone and country.
FedEx(www.fedex.com)
From $40.00 basic shipping fee depend on zone and country.
Registered Mail(www.singpost.com)
From $10.00 basic shipping fee depend on different zone and country.

Package

Product
Step1Product
Casing drivepipe
Step2Casing drivepipe
Anti-static bag
Step3Anti-static bag
Packaging boxes
Step4Packaging boxes
Bar-code shipping tag
Step5Bar-code shipping tag

DG642DY-E3

technical specifications, attributes, parameters and parts with similar specifications to DG642DY-E3.

  • Type
    Parameter
    Select All
  • Contact Plating

    Tin

  • Mount

    Surface Mount

  • Mounting Type

    Surface Mount

  • Package / Case

    8-SOIC (0.154, 3.90mm Width)

  • Number of Pins

    8

  • Weight

    540.001716mg

  • Operating Temperature

    -40°C~85°C TA

  • Packaging

    Tube

  • JESD-609 Code

    e3

  • Pbfree Code

    yes

  • Part Status

    Obsolete

  • Moisture Sensitivity Level (MSL)

    1 (Unlimited)

  • Number of Terminations

    8

  • Resistance

    15Ohm

  • Additional Feature

    VIDEO APPLICATION

  • Subcategory

    Multiplexer or Switches

  • Max Power Dissipation

    300mW

  • Technology

    CMOS

  • Terminal Form

    GULL WING

  • Peak Reflow Temperature (Cel)

    260

  • Number of Functions

    1

  • Supply Voltage

    15V

  • Time@Peak Reflow Temperature-Max (s)

    40

  • Base Part Number

    DG642

  • Pin Count

    8

  • Number of Outputs

    2

  • Operating Supply Voltage

    15V

  • Polarity

    Non-Inverting

  • Number of Channels

    1

  • Max Supply Voltage

    21V

  • Min Supply Voltage

    10V

  • Analog IC - Other Type

    AUDIO/VIDEO SWITCH

  • Operating Supply Current

    3.5mA

  • Nominal Supply Current

    3.5mA

  • Power Dissipation

    300mW

  • Max Supply Current

    6mA

  • Turn On Delay Time

    100 ns

  • Number of Inputs

    1

  • Voltage - Supply, Single/Dual (±)

    3V~15V ±3V~15V

  • Supply Type

    Dual, Single

  • Bandwidth

    500MHz

  • Neg Supply Voltage-Nom (Vsup)

    -3V

  • Turn-Off Delay Time

    60 ns

  • Max Dual Supply Voltage

    15V

  • On-State Resistance (Max)

    8Ohm

  • Min Dual Supply Voltage

    10V

  • High Level Output Current

    100mA

  • Dual Supply Voltage

    12V

  • Multiplexer/Demultiplexer Circuit

    2:1

  • Off-state Isolation-Nom

    63 dB

  • Current - Leakage (IS(off)) (Max)

    10nA

  • Channel Capacitance (CS(off), CD(off))

    20pF 20pF

  • On-state Resistance Match-Nom

    0.5Ohm

  • Switch Circuit

    SPDT

  • Switch Time (Ton, Toff) (Max)

    100ns, 60ns

  • Charge Injection

    40pC

  • Channel-to-Channel Matching (ΔRon)

    500m Ω

  • Crosstalk

    -85dB @ 5MHz

  • Switching

    BREAK-BEFORE-MAKE

  • Drain to Source Resistance

    8Ohm

  • Height

    1.55mm

  • Length

    5mm

  • Width

    4mm

  • Radiation Hardening

    No

  • REACH SVHC

    No SVHC

  • RoHS Status

    ROHS3 Compliant

  • Lead Free

    Lead Free

Hot Sales in Thermal

DG406DY-T

DG406DY-T

DG406DY-T

HI3-0509-5

HI3-0509-5

HI3-0509-5

HI3-0201HS-5

HI3-0201HS-5

HI3-0201HS-5

ISL84051IVZ-T

ISL84051IVZ-T

ISL84051IVZ-T

74HC4353N,652

74HC4353N,652

74HC4353N,652

DG406DJ+

DG406DJ+

DG406DJ+

DG9232DY-T1-E3

DG9232DY-T1-E3

DG9232DY-T1-E3

ADG432BR-REEL

ADG432BR-REEL

ADG432BR-REEL

DG441DY

DG441DY

DG441DY

DG442DY+T

DG442DY+T

DG442DY+T

Parts with Similar Specs

The three parts on the right have similar specifications to Aavid.

  • Image
    Part Name
    Manufacturer
    HK JDW NO
    Package
    Stock
    DataSheet:
    Compare:
  • FSA266K8X
    ON Semiconductor
    598-FSA266K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • NC7WB66K8X
    ON Semiconductor
    598-NC7WB66K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • NC7SB3157P6X
    ON Semiconductor
    598-NC7SB3157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • FSA4157P6X
    ON Semiconductor
    598-FSA4157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • FSA3157L6X
    ON Semiconductor
    598-FSA3157L6X
    6-UFDFN
    2-3 Days
    Add Compare
  • FSA1157P6X
    ON Semiconductor
    598-FSA1157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • DG413DY-E3
    Vishay Siliconix
    880-DG413DY-E3
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • FSA1256L8X
    ON Semiconductor
    598-FSA1256L8X
    8-UFQFN
    2-3 Days
    Add Compare
  • FSA1256AL8X
    ON Semiconductor
    598-FSA1256AL8X
    8-UFQFN
    2-3 Days
    Add Compare
  • DG408DJ
    Vishay Siliconix
    880-DG408DJ
    16-DIP (0.300, 7.62mm)
    2-3 Days
    Add Compare
  • DG442DY
    Vishay Siliconix
    880-DG442DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG445DY
    Vishay Siliconix
    880-DG445DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG271BDY
    Vishay Siliconix
    880-DG271BDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG408LDY
    Vishay Siliconix
    880-DG408LDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG406DN
    Vishay Siliconix
    880-DG406DN
    28-LCC (J-Lead)
    2-3 Days
    Add Compare
  • FSA4157L6X
    ON Semiconductor
    598-FSA4157L6X
    6-UFDFN
    2-3 Days
    Add Compare
  • DG428DN
    Vishay Siliconix
    880-DG428DN
    20-LCC (J-Lead)
    2-3 Days
    Add Compare
  • DG613DY
    Vishay Siliconix
    880-DG613DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG642DY
    Vishay Siliconix
    880-DG642DY
    8-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG411DY-T1
    Vishay Siliconix
    880-DG411DY-T1
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
index:  0 - 9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
Settings Need Help?
Top FAQ's

How can I quickly find answers to my questions?

Please visit the Help & Support area of our website to find information regarding ordering, shipping, delivery and more.

What is my Order Status?

Registered users can track orders from their account dropdown, or click here. *Order Status may take 12 hours to update after initial order is placed.

How do I return product?

Users can begin the returns process by starting with our Returns Page.

How do I find price and availability?

Quotes can be created by registered users in myLists.

How do I create a 'HK JDW' Account?

Visit the Registration Page and enter the required information. You will receive an email confirmation when your registration is complete.

United Kingdom/GBP Summary
Fast Shipping Fast Delivery

Orders are typically delivered to United Kingdom within 48 hours depending on location.

Free Shipping Free Shipping

Free delivery to United Kingdom on orders of £33 or more. A delivery charge of £12 will be billed on all orders less than £33.

Incoterms Incoterms

DDP (Duty and customs paid by HK JDW)

Payment Options Payment Types

Credit account for qualified institutions and businesses

Payment in Advance by Wire Transfer

Visa Mastercard American Express PayPal Apple Pay Google Pay

Marketplace Marketplace Product

More Products From Fully Authorized Partners

Average Time to Ship 1-3 Days, extra ship charges may apply. Please see product page, cart, and checkout for actual ship speed.

Incoterms: CPT (Duty, customs, and applicable VAT/Tax due at time of delivery)

For more information visit Help & Support