Call us: +86 0755-82563503

Currency: $ US Dollar

Items : %s%s

  • DG441DJ-E3

DG441DJ-E3

advertisement

Manufacturer No:

DG441DJ-E3

Manufacturer:

Vishay Siliconix

HK JDW NO:

880-DG441DJ-E3

Package:

16-DIP (0.300, 7.62mm)

Datasheet:

DG441DJ-E3

Description:

220ns, 120ns SPST - NC 85Ohm Analog Switches BREAK-BEFORE-MAKE DG441 16 Pins 500pA 15V 16-DIP (0.300, 7.62mm)

Quantity:

In Stock : 999

Share

Please send RFQ, we will respond immediately.

* Contact Name

* Business Email

* Company Name

* Country

* Quantity

Product Details

Purchasing and Inquiry

DG441DJ-E3 Overview


The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. In Through Hole, you'll find this switch device. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. In total, there have been 16 terminations. As a result of its 1 channels, this electronic component provides high-quality output. A 15V voltage supply should turn on and run the electronic component. An electrical component of this type can be found in the 16 series. These analog multiplexers are built based on SPST - NC switching circuits. Use DG441 to search for variants of the digital switches. As far as internal resistance is concerned, it has 85Ohm. Datasheets for functions of 16 pins are available. It is a typical Multiplexer or Switches analog multiplexer. It is normally recommended that users do not supply the multiplexer with voltages higher than 36V. Dual, Single supply type digital switch with a low cost. There should be 13V voltage fed to the electrical part below 13V. This multiplexer would work with 15μA current. A voltage higher than 100μA may cause damage to the switch multiplexer. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. In the case of dual power supplies, you should connect at least 7V. Among the inputs that can be operated are the 4 inputs. A Drain to Source resistance of 85Ohm is shown for this electronic part.

DG441DJ-E3 Features


1 Channels
Switch Circuit: SPST - NC
15μA Supply Current
Drain-to-Source resistance: 85Ohm

DG441DJ-E3 Applications


There are a lot of Vishay Siliconix DG441DJ-E3 Analog Switches & Multiplexers ICs applications.

  • Data switching
  • Automatic test equipment
  • Fiber In The Loop (FITL)
  • PDH Multiplexers
  • Existing multiplexer applications (both fault-protected and nonfault-protected)
  • Audio signal routing
  • Frame Relay Equipment
  • Audio and video switching
  • Precision data acquisition
  • FTTH
1. Purchase

You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.
EmailEmail for receiving inquiries: jindawei@hkjdwchip.com

2. Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

3. RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

4. Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.

Purchasing and Inquiry

Payment Method

The fee is charged according to the rule of PayPal.
East West Bank charge US$30.00 banking fee.
The fee is charged according to the rule of PayPal.
Western Union charge US$0.00 banking fee.

Shipping

DHL(www.dhl.com)
From $40.00 basic shipping fee depend on zone and country.
UPS(www.ups.com)
From $40.00 basic shipping fee depend on zone and country.
FedEx(www.fedex.com)
From $40.00 basic shipping fee depend on zone and country.
Registered Mail(www.singpost.com)
From $10.00 basic shipping fee depend on different zone and country.

Package

Product
Step1Product
Casing drivepipe
Step2Casing drivepipe
Anti-static bag
Step3Anti-static bag
Packaging boxes
Step4Packaging boxes
Bar-code shipping tag
Step5Bar-code shipping tag

DG441DJ-E3

technical specifications, attributes, parameters and parts with similar specifications to DG441DJ-E3.

  • Type
    Parameter
    Select All
  • Factory Lead Time

    12 Weeks

  • Contact Plating

    Tin

  • Mount

    Through Hole

  • Mounting Type

    Through Hole

  • Package / Case

    16-DIP (0.300, 7.62mm)

  • Number of Pins

    16

  • Weight

    1.627801g

  • Operating Temperature

    -40°C~85°C TA

  • Packaging

    Tube

  • Published

    2002

  • JESD-609 Code

    e3

  • Pbfree Code

    yes

  • Part Status

    Active

  • Moisture Sensitivity Level (MSL)

    1 (Unlimited)

  • Number of Terminations

    16

  • Resistance

    85Ohm

  • Subcategory

    Multiplexer or Switches

  • Max Power Dissipation

    450mW

  • Technology

    CMOS

  • Number of Functions

    4

  • Supply Voltage

    15V

  • Base Part Number

    DG441

  • Pin Count

    16

  • Polarity

    Non-Inverting

  • Number of Channels

    1

  • Max Supply Voltage

    36V

  • Min Supply Voltage

    13V

  • Operating Supply Current

    15μA

  • Nominal Supply Current

    15μA

  • Power Dissipation

    450mW

  • Max Supply Current

    100μA

  • Throw Configuration

    SPST

  • Turn On Delay Time

    250 ns

  • Number of Inputs

    4

  • Voltage - Supply, Single/Dual (±)

    12V ±15V

  • Supply Type

    Dual, Single

  • Neg Supply Voltage-Nom (Vsup)

    -15V

  • Turn-Off Delay Time

    120 ns

  • Max Dual Supply Voltage

    22V

  • On-State Resistance (Max)

    85Ohm

  • Min Dual Supply Voltage

    7V

  • High Level Output Current

    30mA

  • Dual Supply Voltage

    15V

  • Multiplexer/Demultiplexer Circuit

    1:1

  • Off-state Isolation-Nom

    60 dB

  • Current - Leakage (IS(off)) (Max)

    500pA

  • Channel Capacitance (CS(off), CD(off))

    4pF 4pF

  • On-state Resistance Match-Nom

    4Ohm

  • Switch Circuit

    SPST - NC

  • Switch Time (Ton, Toff) (Max)

    220ns, 120ns

  • Charge Injection

    -1pC

  • Channel-to-Channel Matching (ΔRon)

    4 Ω (Max)

  • Crosstalk

    -100dB @ 1MHz

  • Switching

    BREAK-BEFORE-MAKE

  • Drain to Source Resistance

    85Ohm

  • Normal Position

    NC

  • Height

    3.81mm

  • Length

    21.33mm

  • Width

    7.11mm

  • Radiation Hardening

    No

  • REACH SVHC

    No SVHC

  • RoHS Status

    ROHS3 Compliant

  • Lead Free

    Lead Free

Hot Sales in Thermal

DG406DY-T

DG406DY-T

DG406DY-T

HI3-0509-5

HI3-0509-5

HI3-0509-5

HI3-0201HS-5

HI3-0201HS-5

HI3-0201HS-5

ISL84051IVZ-T

ISL84051IVZ-T

ISL84051IVZ-T

74HC4353N,652

74HC4353N,652

74HC4353N,652

DG406DJ+

DG406DJ+

DG406DJ+

DG9232DY-T1-E3

DG9232DY-T1-E3

DG9232DY-T1-E3

ADG432BR-REEL

ADG432BR-REEL

ADG432BR-REEL

DG441DY

DG441DY

DG441DY

DG442DY+T

DG442DY+T

DG442DY+T

Parts with Similar Specs

The three parts on the right have similar specifications to Aavid.

  • Image
    Part Name
    Manufacturer
    HK JDW NO
    Package
    Stock
    DataSheet:
    Compare:
  • FSA266K8X
    ON Semiconductor
    598-FSA266K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • NC7WB66K8X
    ON Semiconductor
    598-NC7WB66K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • NC7SB3157P6X
    ON Semiconductor
    598-NC7SB3157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • FSA4157P6X
    ON Semiconductor
    598-FSA4157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • FSA3157L6X
    ON Semiconductor
    598-FSA3157L6X
    6-UFDFN
    2-3 Days
    Add Compare
  • FSA1157P6X
    ON Semiconductor
    598-FSA1157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • DG413DY-E3
    Vishay Siliconix
    880-DG413DY-E3
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • FSA1256L8X
    ON Semiconductor
    598-FSA1256L8X
    8-UFQFN
    2-3 Days
    Add Compare
  • FSA1256AL8X
    ON Semiconductor
    598-FSA1256AL8X
    8-UFQFN
    2-3 Days
    Add Compare
  • DG408DJ
    Vishay Siliconix
    880-DG408DJ
    16-DIP (0.300, 7.62mm)
    2-3 Days
    Add Compare
  • DG442DY
    Vishay Siliconix
    880-DG442DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG445DY
    Vishay Siliconix
    880-DG445DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG271BDY
    Vishay Siliconix
    880-DG271BDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG408LDY
    Vishay Siliconix
    880-DG408LDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG406DN
    Vishay Siliconix
    880-DG406DN
    28-LCC (J-Lead)
    2-3 Days
    Add Compare
  • FSA4157L6X
    ON Semiconductor
    598-FSA4157L6X
    6-UFDFN
    2-3 Days
    Add Compare
  • DG428DN
    Vishay Siliconix
    880-DG428DN
    20-LCC (J-Lead)
    2-3 Days
    Add Compare
  • DG613DY
    Vishay Siliconix
    880-DG613DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG642DY
    Vishay Siliconix
    880-DG642DY
    8-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG411DY-T1
    Vishay Siliconix
    880-DG411DY-T1
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
index:  0 - 9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
Settings Need Help?
Top FAQ's

How can I quickly find answers to my questions?

Please visit the Help & Support area of our website to find information regarding ordering, shipping, delivery and more.

What is my Order Status?

Registered users can track orders from their account dropdown, or click here. *Order Status may take 12 hours to update after initial order is placed.

How do I return product?

Users can begin the returns process by starting with our Returns Page.

How do I find price and availability?

Quotes can be created by registered users in myLists.

How do I create a 'HK JDW' Account?

Visit the Registration Page and enter the required information. You will receive an email confirmation when your registration is complete.

United Kingdom/GBP Summary
Fast Shipping Fast Delivery

Orders are typically delivered to United Kingdom within 48 hours depending on location.

Free Shipping Free Shipping

Free delivery to United Kingdom on orders of £33 or more. A delivery charge of £12 will be billed on all orders less than £33.

Incoterms Incoterms

DDP (Duty and customs paid by HK JDW)

Payment Options Payment Types

Credit account for qualified institutions and businesses

Payment in Advance by Wire Transfer

Visa Mastercard American Express PayPal Apple Pay Google Pay

Marketplace Marketplace Product

More Products From Fully Authorized Partners

Average Time to Ship 1-3 Days, extra ship charges may apply. Please see product page, cart, and checkout for actual ship speed.

Incoterms: CPT (Duty, customs, and applicable VAT/Tax due at time of delivery)

For more information visit Help & Support