
Items : %s%s
DG405AK
DG405AK
880-DG405AK
16-CDIP (0.300, 7.62mm)
150ns, 100ns DPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE 16 Pins 250pA 16-CDIP (0.300, 7.62mm)
In Stock : 999
Share
Please send RFQ, we will respond immediately.








Product Details
Purchasing and Inquiry
DG405AK Overview
This electronic part is conveniently packaged in 16-CDIP (0.300, 7.62mm), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Through Hole position. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Increasing operating temperature to around -55°C~125°C TA. Total terminations are 16. There are 16 pins injected into the electronic part body. DPST - NO switching circuits are used in these analog switch ics. A 2 circuit is present in this switch device. In this multiplexer, the internal resistance is 35Ohm. To find out what the 16 pins do, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 36V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. 13V is the lowest voltage the electrical component should receive. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. For this switch, a dual supply voltage is feasible, but it must not exceed 22VFor dual power supplies, a voltage of at least 7V should be attached. There are SEPARATE OUTPUT outputs on this analog switch ic. There is a voltage range of 15V operating voltages for the electrical part. A 4 input needs to be operated. There is 35Ohm Drain to Source resistance on this electronic part.
DG405AK Features
Switch Circuit: DPST - NO
Drain-to-Source resistance: 35Ohm
DG405AK Applications
There are a lot of Vishay Siliconix DG405AK Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Fault Tolerant Systems
- Mechanical reed relay replacement
- Wireless Local Loop
- Isolation
- 65 V DACs
- Access Concentrators
- Audio signal routing
- Avionics and Military Systems
You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.
Email for receiving inquiries: jindawei@hkjdwchip.com
For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.
3. RFQ (Request for Quotations)It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.
1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.
Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.
Currently, our products are shipped through DHL, FedEx, SF, and UPS.
Delivery TimeOnce the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.
Payment Method
The fee is charged according to the rule of PayPal. | |
East West Bank charge US$30.00 banking fee. | |
The fee is charged according to the rule of PayPal. | |
Western Union charge US$0.00 banking fee. |
Shipping
DHL(www.dhl.com) From $40.00 basic shipping fee depend on zone and country. |
|
UPS(www.ups.com) From $40.00 basic shipping fee depend on zone and country. |
|
FedEx(www.fedex.com) From $40.00 basic shipping fee depend on zone and country. |
|
Registered Mail(www.singpost.com) From $10.00 basic shipping fee depend on different zone and country. |
Package
![]() |
![]() |
![]() |
![]() |
![]() |
DG405AK
technical specifications, attributes, parameters and parts with similar specifications to DG405AK.
Hot Sales in Thermal
Parts with Similar Specs
The three parts on the right have similar specifications to Aavid.
-
ImagePart NameManufacturerHK JDW NOPackageStockDataSheet:Compare:
-
ON Semiconductor598-FSA266K8X8-VFSOP (0.091, 2.30mm Width)2-3 DaysAdd Compare
-
ON Semiconductor598-NC7WB66K8X8-VFSOP (0.091, 2.30mm Width)2-3 DaysAdd Compare
-
ON Semiconductor598-NC7SB3157P6X6-TSSOP, SC-88, SOT-3632-3 DaysAdd Compare
-
ON Semiconductor598-FSA4157P6X6-TSSOP, SC-88, SOT-3632-3 DaysAdd Compare
-
ON Semiconductor598-FSA3157L6X6-UFDFN2-3 DaysAdd Compare
-
ON Semiconductor598-FSA1157P6X6-TSSOP, SC-88, SOT-3632-3 DaysAdd Compare
-
Vishay Siliconix880-DG413DY-E316-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare
-
ON Semiconductor598-FSA1256L8X8-UFQFN2-3 DaysAdd Compare
-
ON Semiconductor598-FSA1256AL8X8-UFQFN2-3 DaysAdd Compare
-
Vishay Siliconix880-DG408DJ16-DIP (0.300, 7.62mm)2-3 DaysAdd Compare
-
Vishay Siliconix880-DG442DY16-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare
-
Vishay Siliconix880-DG445DY16-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare
-
Vishay Siliconix880-DG271BDY16-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare
-
Vishay Siliconix880-DG408LDY16-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare
-
Vishay Siliconix880-DG406DN28-LCC (J-Lead)2-3 DaysAdd Compare
-
ON Semiconductor598-FSA4157L6X6-UFDFN2-3 DaysAdd Compare
-
Vishay Siliconix880-DG428DN20-LCC (J-Lead)2-3 DaysAdd Compare
-
Vishay Siliconix880-DG613DY16-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare
-
Vishay Siliconix880-DG642DY8-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare
-
Vishay Siliconix880-DG411DY-T116-SOIC (0.154, 3.90mm Width)2-3 DaysAdd Compare