Call us: +86 0755-82563503

Currency: $ US Dollar

Items : %s%s

  • DG401BDY-T1-E3

DG401BDY-T1-E3

advertisement

Manufacturer No:

DG401BDY-T1-E3

Manufacturer:

Vishay Siliconix

HK JDW NO:

880-DG401BDY-T1-E3

Package:

16-SOIC (0.154, 3.90mm Width)

Datasheet:

DG401BDY-T1-E3

Description:

150ns, 100ns SPST - NO 45Ohm Analog Switches BREAK-BEFORE-MAKE DG401 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Quantity:

In Stock : 999

Share

Please send RFQ, we will respond immediately.

* Contact Name

* Business Email

* Company Name

* Country

* Quantity

Product Details

Purchasing and Inquiry

DG401BDY-T1-E3 Overview


Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. Operational temperature extended around -40°C~85°C TA. The total number of terminations is 16. By its 1 channels, the electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. It is part of the design of the 16 series that this electronic component is included. The analog switch ics are built using SPST - NO switching circuits. Use DG401 to search for variants of the digital switches. A 55Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 36V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Dual, Single supply type. 13V is the lowest voltage that should be fed to the electronic electronic part. The analogue multiplexer could operate on 1mA current. Putting voltage greater than 500μA on the multiplexer may cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 22V. A dual power supply should have at least 7V voltage attached. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. A voltage of 15V can be used to operate the electronic component. In order to operate the 2 inputs, there are several steps to follow.

DG401BDY-T1-E3 Features


1 Channels
Switch Circuit: SPST - NO
1mA Supply Current

DG401BDY-T1-E3 Applications


There are a lot of Vishay Siliconix DG401BDY-T1-E3 Analog Switches & Multiplexers ICs applications.

  • SONET
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Fiber In The Loop (FITL)
  • Modems
  • Audio and video switching
  • Communication systems
  • Precision instrumentation
  • Sample hold systems
  • Switching Systems
  • Avionics
1. Purchase

You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.
EmailEmail for receiving inquiries: jindawei@hkjdwchip.com

2. Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

3. RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

4. Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.

Purchasing and Inquiry

Payment Method

The fee is charged according to the rule of PayPal.
East West Bank charge US$30.00 banking fee.
The fee is charged according to the rule of PayPal.
Western Union charge US$0.00 banking fee.

Shipping

DHL(www.dhl.com)
From $40.00 basic shipping fee depend on zone and country.
UPS(www.ups.com)
From $40.00 basic shipping fee depend on zone and country.
FedEx(www.fedex.com)
From $40.00 basic shipping fee depend on zone and country.
Registered Mail(www.singpost.com)
From $10.00 basic shipping fee depend on different zone and country.

Package

Product
Step1Product
Casing drivepipe
Step2Casing drivepipe
Anti-static bag
Step3Anti-static bag
Packaging boxes
Step4Packaging boxes
Bar-code shipping tag
Step5Bar-code shipping tag

DG401BDY-T1-E3

technical specifications, attributes, parameters and parts with similar specifications to DG401BDY-T1-E3.

  • Type
    Parameter
    Select All
  • Channel Capacitance (CS(off), CD(off))

    12pF 12pF

  • On-state Resistance Match-Nom

    3Ohm

  • Switch Circuit

    SPST - NO

  • Switch Time (Ton, Toff) (Max)

    150ns, 100ns

  • Charge Injection

    60pC

  • Crosstalk

    -94.8dB @ 1MHz

  • Switching

    BREAK-BEFORE-MAKE

  • Normal Position

    NO

  • Voltage - Supply, Dual (V±)

    ±15V

  • Height

    1.55mm

  • Length

    10mm

  • Width

    4mm

  • Radiation Hardening

    No

  • RoHS Status

    ROHS3 Compliant

  • Factory Lead Time

    13 Weeks

  • Mount

    Surface Mount

  • Mounting Type

    Surface Mount

  • Package / Case

    16-SOIC (0.154, 3.90mm Width)

  • Number of Pins

    16

  • Weight

    665.986997mg

  • Operating Temperature

    -40°C~85°C TA

  • Packaging

    Tape & Reel (TR)

  • Published

    2016

  • JESD-609 Code

    e3

  • Pbfree Code

    yes

  • Part Status

    Active

  • Moisture Sensitivity Level (MSL)

    1 (Unlimited)

  • Number of Terminations

    16

  • Resistance

    55Ohm

  • Terminal Finish

    Matte Tin (Sn)

  • Subcategory

    Multiplexer or Switches

  • Max Power Dissipation

    600mW

  • Technology

    CMOS

  • Terminal Form

    GULL WING

  • Peak Reflow Temperature (Cel)

    260

  • Number of Functions

    2

  • Supply Voltage

    15V

  • Time@Peak Reflow Temperature-Max (s)

    40

  • Base Part Number

    DG401

  • Output

    SEPARATE OUTPUT

  • Pin Count

    16

  • Operating Supply Voltage

    15V

  • Number of Channels

    1

  • Max Supply Voltage

    36V

  • Min Supply Voltage

    13V

  • Operating Supply Current

    1mA

  • Power Dissipation

    600mW

  • Max Supply Current

    500μA

  • Throw Configuration

    SPST

  • Turn On Delay Time

    150 ns

  • Number of Inputs

    2

  • Supply Type

    Dual, Single

  • Neg Supply Voltage-Nom (Vsup)

    -15V

  • Turn-Off Delay Time

    100 ns

  • Max Dual Supply Voltage

    22V

  • On-State Resistance (Max)

    45Ohm

  • Min Dual Supply Voltage

    7V

  • Dual Supply Voltage

    15V

  • Multiplexer/Demultiplexer Circuit

    1:1

  • Off-state Isolation-Nom

    72 dB

  • Current - Leakage (IS(off)) (Max)

    500pA

Hot Sales in Thermal

HI4P0506-5Z

HI4P0506-5Z

HI4P0506-5Z

HI1-5042-2

HI1-5042-2

HI1-5042-2

HI3-0549-5Z

HI3-0549-5Z

HI3-0549-5Z

74LVC1G3157DCKRE4

74LVC1G3157DCKRE4

74LVC1G3157DCKRE4

HEF4066BP,652

HEF4066BP,652

HEF4066BP,652

HI9P0546-996

HI9P0546-996

HI9P0546-996

ISL84542IH-T

ISL84542IH-T

ISL84542IH-T

MAX14803AEWZ+T

MAX14803AEWZ+T

MAX14803AEWZ+T

MAX382CWN+T

MAX382CWN+T

MAX382CWN+T

ADG1411YRUZ

ADG1411YRUZ

ADG1411YRUZ

Parts with Similar Specs

The three parts on the right have similar specifications to Aavid.

  • Image
    Part Name
    Manufacturer
    HK JDW NO
    Package
    Stock
    DataSheet:
    Compare:
  • FSA266K8X
    ON Semiconductor
    598-FSA266K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • NC7WB66K8X
    ON Semiconductor
    598-NC7WB66K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • NC7SB3157P6X
    ON Semiconductor
    598-NC7SB3157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • FSA4157P6X
    ON Semiconductor
    598-FSA4157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • FSA3157L6X
    ON Semiconductor
    598-FSA3157L6X
    6-UFDFN
    2-3 Days
    Add Compare
  • FSA1157P6X
    ON Semiconductor
    598-FSA1157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • DG413DY-E3
    Vishay Siliconix
    880-DG413DY-E3
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • FSA1256L8X
    ON Semiconductor
    598-FSA1256L8X
    8-UFQFN
    2-3 Days
    Add Compare
  • FSA1256AL8X
    ON Semiconductor
    598-FSA1256AL8X
    8-UFQFN
    2-3 Days
    Add Compare
  • DG408DJ
    Vishay Siliconix
    880-DG408DJ
    16-DIP (0.300, 7.62mm)
    2-3 Days
    Add Compare
  • DG442DY
    Vishay Siliconix
    880-DG442DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG445DY
    Vishay Siliconix
    880-DG445DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG271BDY
    Vishay Siliconix
    880-DG271BDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG408LDY
    Vishay Siliconix
    880-DG408LDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG406DN
    Vishay Siliconix
    880-DG406DN
    28-LCC (J-Lead)
    2-3 Days
    Add Compare
  • FSA4157L6X
    ON Semiconductor
    598-FSA4157L6X
    6-UFDFN
    2-3 Days
    Add Compare
  • DG428DN
    Vishay Siliconix
    880-DG428DN
    20-LCC (J-Lead)
    2-3 Days
    Add Compare
  • DG613DY
    Vishay Siliconix
    880-DG613DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG642DY
    Vishay Siliconix
    880-DG642DY
    8-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG411DY-T1
    Vishay Siliconix
    880-DG411DY-T1
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
index:  0 - 9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
Settings Need Help?
Top FAQ's

How can I quickly find answers to my questions?

Please visit the Help & Support area of our website to find information regarding ordering, shipping, delivery and more.

What is my Order Status?

Registered users can track orders from their account dropdown, or click here. *Order Status may take 12 hours to update after initial order is placed.

How do I return product?

Users can begin the returns process by starting with our Returns Page.

How do I find price and availability?

Quotes can be created by registered users in myLists.

How do I create a 'HK JDW' Account?

Visit the Registration Page and enter the required information. You will receive an email confirmation when your registration is complete.

United Kingdom/GBP Summary
Fast Shipping Fast Delivery

Orders are typically delivered to United Kingdom within 48 hours depending on location.

Free Shipping Free Shipping

Free delivery to United Kingdom on orders of £33 or more. A delivery charge of £12 will be billed on all orders less than £33.

Incoterms Incoterms

DDP (Duty and customs paid by HK JDW)

Payment Options Payment Types

Credit account for qualified institutions and businesses

Payment in Advance by Wire Transfer

Visa Mastercard American Express PayPal Apple Pay Google Pay

Marketplace Marketplace Product

More Products From Fully Authorized Partners

Average Time to Ship 1-3 Days, extra ship charges may apply. Please see product page, cart, and checkout for actual ship speed.

Incoterms: CPT (Duty, customs, and applicable VAT/Tax due at time of delivery)

For more information visit Help & Support