Call us: +86 0755-82563503

Currency: $ US Dollar

Items : %s%s

  • DG303BDY-E3

DG303BDY-E3

advertisement

Manufacturer No:

DG303BDY-E3

Manufacturer:

Vishay Siliconix

HK JDW NO:

880-DG303BDY-E3

Package:

14-SOIC (0.154, 3.90mm Width)

Datasheet:

DG303BDY-E3

Description:

300ns, 250ns DPST - NO/NC 50Ohm Analog Switches BREAK-BEFORE-MAKE DG303 14 Pins 1nA 15V 14-SOIC (0.154, 3.90mm Width)

Quantity:

In Stock : 999

Share

Please send RFQ, we will respond immediately.

* Contact Name

* Business Email

* Company Name

* Country

* Quantity

Product Details

Purchasing and Inquiry

DG303BDY-E3 Overview


Presented in 14-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Increasing operating temperature to around -40°C~85°C TA. 14 terminations have been made so far. The electronic part provides high-quality output because it has 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. A total of 14 pins are injected into the electrical part body. Unlike digital switches, these are based on DPST - NO/NC switching circuits. Circuits number 2 make up this analogue multiplexer. Try searching for the analog switch ic with DG303 if you are looking for variants. An switch multiplexer with 50Ohm internal resistance has a value of 50Ohm. Datasheets for functions of 14 pins are available. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 36V volts for the multiplexer. A analog switch ic that has a cost-effective Dual, Single supply type. The lowest voltage the electronic part should receive is 13V. It would be sufficient to run this analogue multiplexer with 230μA current. When the digital multiplexer is charged above 1mA, damage can occur. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 7V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Operating voltages of 15V are compatible with the electrical part. Operating 4 inputs is required. Drain to Source resistance for this electronic component is 30Ohm.

DG303BDY-E3 Features


1 Channels
Switch Circuit: DPST - NO/NC
230μA Supply Current
Drain-to-Source resistance: 30Ohm

DG303BDY-E3 Applications


There are a lot of Vishay Siliconix DG303BDY-E3 Analog Switches & Multiplexers ICs applications.

  • Multi-Line E1 Interface Cards
  • PBX interfaces
  • Fault Tolerant Systems
  • Residential Gateways, Home Gateway/Router
  • Industrial control systems
  • PDAs
  • E1 Network Equipment
  • Private Branch Exchange (PBX)
  • Communication systems
  • Precision data acquisition
1. Purchase

You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.
EmailEmail for receiving inquiries: jindawei@hkjdwchip.com

2. Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

3. RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

4. Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.

Purchasing and Inquiry

Payment Method

The fee is charged according to the rule of PayPal.
East West Bank charge US$30.00 banking fee.
The fee is charged according to the rule of PayPal.
Western Union charge US$0.00 banking fee.

Shipping

DHL(www.dhl.com)
From $40.00 basic shipping fee depend on zone and country.
UPS(www.ups.com)
From $40.00 basic shipping fee depend on zone and country.
FedEx(www.fedex.com)
From $40.00 basic shipping fee depend on zone and country.
Registered Mail(www.singpost.com)
From $10.00 basic shipping fee depend on different zone and country.

Package

Product
Step1Product
Casing drivepipe
Step2Casing drivepipe
Anti-static bag
Step3Anti-static bag
Packaging boxes
Step4Packaging boxes
Bar-code shipping tag
Step5Bar-code shipping tag

DG303BDY-E3

technical specifications, attributes, parameters and parts with similar specifications to DG303BDY-E3.

  • Type
    Parameter
    Select All
  • Factory Lead Time

    12 Weeks

  • Mount

    Surface Mount

  • Mounting Type

    Surface Mount

  • Package / Case

    14-SOIC (0.154, 3.90mm Width)

  • Number of Pins

    14

  • Weight

    338.011364mg

  • Operating Temperature

    -40°C~85°C TA

  • Packaging

    Tube

  • Published

    2009

  • JESD-609 Code

    e3

  • Pbfree Code

    yes

  • Part Status

    Active

  • Moisture Sensitivity Level (MSL)

    1 (Unlimited)

  • Number of Terminations

    14

  • Resistance

    50Ohm

  • Terminal Finish

    Matte Tin (Sn)

  • Subcategory

    Multiplexer or Switches

  • Max Power Dissipation

    600mW

  • Technology

    CMOS

  • Terminal Form

    GULL WING

  • Peak Reflow Temperature (Cel)

    260

  • Number of Functions

    2

  • Supply Voltage

    15V

  • Time@Peak Reflow Temperature-Max (s)

    40

  • Base Part Number

    DG303

  • Output

    SEPARATE OUTPUT

  • Pin Count

    14

  • Qualification Status

    Not Qualified

  • Operating Supply Voltage

    15V

  • Number of Channels

    1

  • Number of Circuits

    2

  • Max Supply Voltage

    36V

  • Min Supply Voltage

    13V

  • Operating Supply Current

    230μA

  • Nominal Supply Current

    230nA

  • Power Dissipation

    600mW

  • Max Supply Current

    1mA

  • Throw Configuration

    DPST, SPDT

  • Turn On Delay Time

    150 ns

  • Number of Inputs

    4

  • Supply Type

    Dual, Single

  • Neg Supply Voltage-Nom (Vsup)

    -15V

  • Turn-Off Delay Time

    130 ns

  • Max Dual Supply Voltage

    22V

  • On-State Resistance (Max)

    50Ohm

  • Min Dual Supply Voltage

    7V

  • Dual Supply Voltage

    15V

  • Multiplexer/Demultiplexer Circuit

    2:1

  • Off-state Isolation-Nom

    62 dB

  • Current - Leakage (IS(off)) (Max)

    1nA

  • Channel Capacitance (CS(off), CD(off))

    14pF 14pF

  • Switch Circuit

    DPST - NO/NC

  • Switch Time (Ton, Toff) (Max)

    300ns, 250ns

  • Charge Injection

    8pC

  • Crosstalk

    -74dB @ 500kHz

  • Switching

    BREAK-BEFORE-MAKE

  • Drain to Source Resistance

    30Ohm

  • Voltage - Supply, Dual (V±)

    ±15V

  • Height

    1.55mm

  • Length

    8.75mm

  • Width

    4mm

  • REACH SVHC

    Unknown

  • RoHS Status

    ROHS3 Compliant

  • Lead Free

    Lead Free

Hot Sales in Thermal

MC74HC4851ADTR2G

MC74HC4851ADTR2G

MC74HC4851ADTR2G

HI1-0509-4

HI1-0509-4

HI1-0509-4

ADG608TRUZ

ADG608TRUZ

ADG608TRUZ

ADG1308BRZ

ADG1308BRZ

ADG1308BRZ

MAX391EPE+

MAX391EPE+

MAX391EPE+

MAX4614EUD+T

MAX4614EUD+T

MAX4614EUD+T

DG412DY

DG412DY

DG412DY

5962-9204101MEA

5962-9204101MEA

5962-9204101MEA

MAX4996LETG+T

MAX4996LETG+T

MAX4996LETG+T

DG308ADY+

DG308ADY+

DG308ADY+

Parts with Similar Specs

The three parts on the right have similar specifications to Aavid.

  • Image
    Part Name
    Manufacturer
    HK JDW NO
    Package
    Stock
    DataSheet:
    Compare:
  • FSA266K8X
    ON Semiconductor
    598-FSA266K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • NC7WB66K8X
    ON Semiconductor
    598-NC7WB66K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • NC7SB3157P6X
    ON Semiconductor
    598-NC7SB3157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • FSA4157P6X
    ON Semiconductor
    598-FSA4157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • FSA3157L6X
    ON Semiconductor
    598-FSA3157L6X
    6-UFDFN
    2-3 Days
    Add Compare
  • FSA1157P6X
    ON Semiconductor
    598-FSA1157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • DG413DY-E3
    Vishay Siliconix
    880-DG413DY-E3
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • FSA1256L8X
    ON Semiconductor
    598-FSA1256L8X
    8-UFQFN
    2-3 Days
    Add Compare
  • FSA1256AL8X
    ON Semiconductor
    598-FSA1256AL8X
    8-UFQFN
    2-3 Days
    Add Compare
  • DG408DJ
    Vishay Siliconix
    880-DG408DJ
    16-DIP (0.300, 7.62mm)
    2-3 Days
    Add Compare
  • DG442DY
    Vishay Siliconix
    880-DG442DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG445DY
    Vishay Siliconix
    880-DG445DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG271BDY
    Vishay Siliconix
    880-DG271BDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG408LDY
    Vishay Siliconix
    880-DG408LDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG406DN
    Vishay Siliconix
    880-DG406DN
    28-LCC (J-Lead)
    2-3 Days
    Add Compare
  • FSA4157L6X
    ON Semiconductor
    598-FSA4157L6X
    6-UFDFN
    2-3 Days
    Add Compare
  • DG428DN
    Vishay Siliconix
    880-DG428DN
    20-LCC (J-Lead)
    2-3 Days
    Add Compare
  • DG613DY
    Vishay Siliconix
    880-DG613DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG642DY
    Vishay Siliconix
    880-DG642DY
    8-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG411DY-T1
    Vishay Siliconix
    880-DG411DY-T1
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
index:  0 - 9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
Settings Need Help?
Top FAQ's

How can I quickly find answers to my questions?

Please visit the Help & Support area of our website to find information regarding ordering, shipping, delivery and more.

What is my Order Status?

Registered users can track orders from their account dropdown, or click here. *Order Status may take 12 hours to update after initial order is placed.

How do I return product?

Users can begin the returns process by starting with our Returns Page.

How do I find price and availability?

Quotes can be created by registered users in myLists.

How do I create a 'HK JDW' Account?

Visit the Registration Page and enter the required information. You will receive an email confirmation when your registration is complete.

United Kingdom/GBP Summary
Fast Shipping Fast Delivery

Orders are typically delivered to United Kingdom within 48 hours depending on location.

Free Shipping Free Shipping

Free delivery to United Kingdom on orders of £33 or more. A delivery charge of £12 will be billed on all orders less than £33.

Incoterms Incoterms

DDP (Duty and customs paid by HK JDW)

Payment Options Payment Types

Credit account for qualified institutions and businesses

Payment in Advance by Wire Transfer

Visa Mastercard American Express PayPal Apple Pay Google Pay

Marketplace Marketplace Product

More Products From Fully Authorized Partners

Average Time to Ship 1-3 Days, extra ship charges may apply. Please see product page, cart, and checkout for actual ship speed.

Incoterms: CPT (Duty, customs, and applicable VAT/Tax due at time of delivery)

For more information visit Help & Support