Call us: +86 0755-82563503

Currency: $ US Dollar

Items : %s%s

  • DG303BDY

DG303BDY

advertisement

Manufacturer No:

DG303BDY

Manufacturer:

Vishay Siliconix

HK JDW NO:

880-DG303BDY

Package:

14-SOIC (0.154, 3.90mm Width)

Datasheet:

DG303BDY

Description:

300ns, 250ns DPST - NO/NC 50Ohm Analog Switches BREAK-BEFORE-MAKE 14 Pins 1nA 15V 14-SOIC (0.154, 3.90mm Width)

Quantity:

In Stock : 999

Share

Please send RFQ, we will respond immediately.

* Contact Name

* Business Email

* Company Name

* Country

* Quantity

Product Details

Purchasing and Inquiry

DG303BDY Overview


The electronic part can be shipped overseas conveniently because it is packaged in 14-SOIC (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 14. It is safe to turn on and run the electronic component with a 15V voltage supply. Into the electrical component body are injected 14 pins. On the other hand, analog switches can be constructed using DPST - NO/NC switching circuits. It consists of 2 circuits. In this multiplexer, the internal resistance is 50Ohm. To find out what the 14 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 36V voltage to the switch device. Analogue multiplexer with a Dual, Single supply type that is cost-effective. It is recommended to use 13V as the lowest voltage for the electrical part. The analogue multiplexer may be damaged if voltage is greater than 1mA. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. A dual power supply should have at least 7V voltage attached. An analog IC with the number SPST is integrated into this board. There is a voltage range of 15V operating voltages for the electrical part. There is 50Ohm resistance between the Drain and Source on this part. A analog switch ics with 4 outputs is included.

DG303BDY Features


Switch Circuit: DPST - NO/NC
Drain-to-Source resistance: 50Ohm

DG303BDY Applications


There are a lot of Vishay Siliconix DG303BDY Analog Switches & Multiplexers ICs applications.

  • Cross Connects
  • Precision data acquisition
  • Channelized and Unchannelized DS3 applications
  • Sample hold systems
  • Communications systems
  • Communication systems
  • Signal routing between systems
  • Data switching
  • Switching Systems
  • USB 1.1 signal switching circuits
1. Purchase

You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.
EmailEmail for receiving inquiries: jindawei@hkjdwchip.com

2. Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

3. RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

4. Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.

Purchasing and Inquiry

Payment Method

The fee is charged according to the rule of PayPal.
East West Bank charge US$30.00 banking fee.
The fee is charged according to the rule of PayPal.
Western Union charge US$0.00 banking fee.

Shipping

DHL(www.dhl.com)
From $40.00 basic shipping fee depend on zone and country.
UPS(www.ups.com)
From $40.00 basic shipping fee depend on zone and country.
FedEx(www.fedex.com)
From $40.00 basic shipping fee depend on zone and country.
Registered Mail(www.singpost.com)
From $10.00 basic shipping fee depend on different zone and country.

Package

Product
Step1Product
Casing drivepipe
Step2Casing drivepipe
Anti-static bag
Step3Anti-static bag
Packaging boxes
Step4Packaging boxes
Bar-code shipping tag
Step5Bar-code shipping tag

DG303BDY

technical specifications, attributes, parameters and parts with similar specifications to DG303BDY.

  • Type
    Parameter
    Select All
  • Number of Pins

    14

  • Weight

    1.620005g

  • Operating Temperature

    -40°C~85°C TA

  • Packaging

    Tube

  • Published

    2009

  • Pbfree Code

    no

  • Part Status

    Obsolete

  • Moisture Sensitivity Level (MSL)

    1 (Unlimited)

  • Number of Terminations

    14

  • Resistance

    50Ohm

  • Subcategory

    Multiplexer or Switches

  • Max Power Dissipation

    600mW

  • Technology

    CMOS

  • Terminal Form

    GULL WING

  • Number of Functions

    4

  • Supply Voltage

    15V

  • Pin Count

    14

  • Number of Outputs

    4

  • Operating Supply Voltage

    15V

  • Number of Circuits

    2

  • Max Supply Voltage

    36V

  • Min Supply Voltage

    13V

  • Analog IC - Other Type

    SPST

  • Power Dissipation

    600mW

  • Max Supply Current

    1mA

  • Turn On Delay Time

    150 ns

  • Supply Type

    Dual, Single

  • Neg Supply Voltage-Nom (Vsup)

    -15V

  • Turn-Off Delay Time

    130 ns

  • Max Dual Supply Voltage

    22V

  • On-State Resistance (Max)

    50Ohm

  • Min Dual Supply Voltage

    7V

  • Dual Supply Voltage

    15V

  • Multiplexer/Demultiplexer Circuit

    2:1

  • Current - Leakage (IS(off)) (Max)

    1nA

  • Channel Capacitance (CS(off), CD(off))

    14pF 14pF

  • Switch Circuit

    DPST - NO/NC

  • Switch Time (Ton, Toff) (Max)

    300ns, 250ns

  • Charge Injection

    8pC

  • Crosstalk

    -74dB @ 500kHz

  • Switching

    BREAK-BEFORE-MAKE

  • Drain to Source Resistance

    50Ohm

  • Voltage - Supply, Dual (V±)

    ±15V

  • Height

    1.55mm

  • Length

    8.75mm

  • Width

    4mm

  • Radiation Hardening

    No

  • RoHS Status

    Non-RoHS Compliant

  • Factory Lead Time

    8 Weeks

  • Mount

    Surface Mount

  • Mounting Type

    Surface Mount

  • Package / Case

    14-SOIC (0.154, 3.90mm Width)

Hot Sales in Thermal

HI3-0509-5

HI3-0509-5

HI3-0509-5

HI3-0201HS-5

HI3-0201HS-5

HI3-0201HS-5

ISL84051IVZ-T

ISL84051IVZ-T

ISL84051IVZ-T

74HC4353N,652

74HC4353N,652

74HC4353N,652

DG406DJ+

DG406DJ+

DG406DJ+

DG9232DY-T1-E3

DG9232DY-T1-E3

DG9232DY-T1-E3

ADG432BR-REEL

ADG432BR-REEL

ADG432BR-REEL

DG442DY+T

DG442DY+T

DG442DY+T

DG401BDY-T1

DG401BDY-T1

DG401BDY-T1

DG441LDQ-T1-E3

DG441LDQ-T1-E3

DG441LDQ-T1-E3

Parts with Similar Specs

The three parts on the right have similar specifications to Aavid.

  • Image
    Part Name
    Manufacturer
    HK JDW NO
    Package
    Stock
    DataSheet:
    Compare:
  • DG408DJ
    Vishay Siliconix
    880-DG408DJ
    16-DIP (0.300, 7.62mm)
    2-3 Days
    Add Compare
  • DG442DY
    Vishay Siliconix
    880-DG442DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG445DY
    Vishay Siliconix
    880-DG445DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG271BDY
    Vishay Siliconix
    880-DG271BDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG408LDY
    Vishay Siliconix
    880-DG408LDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG406DN
    Vishay Siliconix
    880-DG406DN
    28-LCC (J-Lead)
    2-3 Days
    Add Compare
  • DG428DN
    Vishay Siliconix
    880-DG428DN
    20-LCC (J-Lead)
    2-3 Days
    Add Compare
  • DG613DY
    Vishay Siliconix
    880-DG613DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG642DY
    Vishay Siliconix
    880-DG642DY
    8-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG411DY-T1
    Vishay Siliconix
    880-DG411DY-T1
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
index:  0 - 9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
Settings Need Help?
Top FAQ's

How can I quickly find answers to my questions?

Please visit the Help & Support area of our website to find information regarding ordering, shipping, delivery and more.

What is my Order Status?

Registered users can track orders from their account dropdown, or click here. *Order Status may take 12 hours to update after initial order is placed.

How do I return product?

Users can begin the returns process by starting with our Returns Page.

How do I find price and availability?

Quotes can be created by registered users in myLists.

How do I create a 'HK JDW' Account?

Visit the Registration Page and enter the required information. You will receive an email confirmation when your registration is complete.

United Kingdom/GBP Summary
Fast Shipping Fast Delivery

Orders are typically delivered to United Kingdom within 48 hours depending on location.

Free Shipping Free Shipping

Free delivery to United Kingdom on orders of £33 or more. A delivery charge of £12 will be billed on all orders less than £33.

Incoterms Incoterms

DDP (Duty and customs paid by HK JDW)

Payment Options Payment Types

Credit account for qualified institutions and businesses

Payment in Advance by Wire Transfer

Visa Mastercard American Express PayPal Apple Pay Google Pay

Marketplace Marketplace Product

More Products From Fully Authorized Partners

Average Time to Ship 1-3 Days, extra ship charges may apply. Please see product page, cart, and checkout for actual ship speed.

Incoterms: CPT (Duty, customs, and applicable VAT/Tax due at time of delivery)

For more information visit Help & Support