Call us: +86 0755-82563503

Currency: $ US Dollar

Items : %s%s

  • DG2733DQ-T1-E3

DG2733DQ-T1-E3

advertisement

Manufacturer No:

DG2733DQ-T1-E3

Manufacturer:

Vishay Siliconix

HK JDW NO:

880-DG2733DQ-T1-E3

Package:

10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Datasheet:

DG2733DQ-T1-E3

Description:

110ns, 30ns SPDT 450mOhm DUAL Analog Switches BREAK-BEFORE-MAKE DG2733 10 Pins 1nA 3V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Quantity:

In Stock : 999

Share

Please send RFQ, we will respond immediately.

* Contact Name

* Business Email

* Company Name

* Country

* Quantity

Product Details

Purchasing and Inquiry

DG2733DQ-T1-E3 Overview


The electronic part can be shipped overseas conveniently because it is packaged in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. 2:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. Totally, there are 10 terminations. By its 1 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. There are 10 pins injected into the electronic part body. A SPDT switching circuit is used for these analog switches. Try searching for DG2733 variants of the analog switch ic. There is 400mOhm internal resistance in this digital multiplexer. The datasheets for the 10 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 4.3V volts for the multiplexer. The analog switch ic is of the Single supply type and is cost-effective. A low voltage of 1.65V should be applied to the electronic component. The analogue multiplexer could operate on 1μA current. Analogue multiplexers require a 1.65V~4.3V voltage to drain from a single voltage supply. Put voltage above 1mA on the multiplexer to cause damage. Among the inputs that can be operated are the 2 inputs. It has a Drain to Source resistance of 300mOhm ohms. There are 4 outputs on the analogue multiplexer.

DG2733DQ-T1-E3 Features


1 Channels
Switch Circuit: SPDT
1μA Supply Current
Drain-to-Source resistance: 300mOhm

DG2733DQ-T1-E3 Applications


There are a lot of Vishay Siliconix DG2733DQ-T1-E3 Analog Switches & Multiplexers ICs applications.

  • PDH Multiplexers
  • ATM
  • Voice over IP/DSL – Integrated Access Devices, Smart
  • Frame Relay Equipment
  • Signal routing between systems
  • Communications systems
  • Multiplexers
  • Industrial control systems
  • Battery Powered Instruments
  • PCMCIA cards
1. Purchase

You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.
EmailEmail for receiving inquiries: jindawei@hkjdwchip.com

2. Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

3. RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

4. Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.

Purchasing and Inquiry

Payment Method

The fee is charged according to the rule of PayPal.
East West Bank charge US$30.00 banking fee.
The fee is charged according to the rule of PayPal.
Western Union charge US$0.00 banking fee.

Shipping

DHL(www.dhl.com)
From $40.00 basic shipping fee depend on zone and country.
UPS(www.ups.com)
From $40.00 basic shipping fee depend on zone and country.
FedEx(www.fedex.com)
From $40.00 basic shipping fee depend on zone and country.
Registered Mail(www.singpost.com)
From $10.00 basic shipping fee depend on different zone and country.

Package

Product
Step1Product
Casing drivepipe
Step2Casing drivepipe
Anti-static bag
Step3Anti-static bag
Packaging boxes
Step4Packaging boxes
Bar-code shipping tag
Step5Bar-code shipping tag

DG2733DQ-T1-E3

technical specifications, attributes, parameters and parts with similar specifications to DG2733DQ-T1-E3.

  • Type
    Parameter
    Select All
  • Mount

    Surface Mount

  • Mounting Type

    Surface Mount

  • Package / Case

    10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

  • Number of Pins

    10

  • Operating Temperature

    -40°C~85°C TA

  • Packaging

    Tape & Reel (TR)

  • Published

    2009

  • JESD-609 Code

    e3

  • Pbfree Code

    yes

  • Part Status

    Obsolete

  • Moisture Sensitivity Level (MSL)

    1 (Unlimited)

  • Number of Terminations

    10

  • Termination

    SMD/SMT

  • Resistance

    400mOhm

  • Terminal Finish

    Matte Tin (Sn)

  • Subcategory

    Multiplexer or Switches

  • Max Power Dissipation

    320mW

  • Technology

    CMOS

  • Terminal Position

    DUAL

  • Terminal Form

    GULL WING

  • Peak Reflow Temperature (Cel)

    260

  • Number of Functions

    2

  • Supply Voltage

    3V

  • Terminal Pitch

    0.5mm

  • Reach Compliance Code

    unknown

  • Time@Peak Reflow Temperature-Max (s)

    40

  • Base Part Number

    DG2733

  • Pin Count

    10

  • Number of Outputs

    4

  • Qualification Status

    Not Qualified

  • Number of Channels

    1

  • Max Supply Voltage

    4.3V

  • Min Supply Voltage

    1.65V

  • Operating Supply Current

    1μA

  • Power Dissipation

    320mW

  • Max Supply Current

    1mA

  • Turn On Delay Time

    110 ns

  • Number of Inputs

    2

  • Supply Type

    Single

  • Turn-Off Delay Time

    30 ns

  • On-State Resistance (Max)

    450mOhm

  • Multiplexer/Demultiplexer Circuit

    2:1

  • Off-state Isolation-Nom

    75 dB

  • Current - Leakage (IS(off)) (Max)

    1nA

  • Channel Capacitance (CS(off), CD(off))

    104pF

  • On-state Resistance Match-Nom

    0.03Ohm

  • Switch Circuit

    SPDT

  • Switch Time (Ton, Toff) (Max)

    110ns, 30ns

  • Charge Injection

    9pC

  • Channel-to-Channel Matching (ΔRon)

    30m Ω

  • Crosstalk

    -75dB @ 100kHz

  • Switching

    BREAK-BEFORE-MAKE

  • Voltage - Supply, Single (V+)

    1.65V~4.3V

  • Drain to Source Resistance

    300mOhm

  • Height Seated (Max)

    1.1mm

  • Length

    3mm

  • Width

    3mm

  • REACH SVHC

    No SVHC

  • RoHS Status

    ROHS3 Compliant

Hot Sales in Thermal

DG406DY-T

DG406DY-T

DG406DY-T

HI3-0509-5

HI3-0509-5

HI3-0509-5

HI3-0201HS-5

HI3-0201HS-5

HI3-0201HS-5

ISL84051IVZ-T

ISL84051IVZ-T

ISL84051IVZ-T

74HC4353N,652

74HC4353N,652

74HC4353N,652

DG406DJ+

DG406DJ+

DG406DJ+

DG9232DY-T1-E3

DG9232DY-T1-E3

DG9232DY-T1-E3

ADG432BR-REEL

ADG432BR-REEL

ADG432BR-REEL

DG442DY+T

DG442DY+T

DG442DY+T

DG401BDY-T1

DG401BDY-T1

DG401BDY-T1

Parts with Similar Specs

The three parts on the right have similar specifications to Aavid.

  • Image
    Part Name
    Manufacturer
    HK JDW NO
    Package
    Stock
    DataSheet:
    Compare:
  • FSA266K8X
    ON Semiconductor
    598-FSA266K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • NC7WB66K8X
    ON Semiconductor
    598-NC7WB66K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • NC7SB3157P6X
    ON Semiconductor
    598-NC7SB3157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • FSA4157P6X
    ON Semiconductor
    598-FSA4157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • FSA3157L6X
    ON Semiconductor
    598-FSA3157L6X
    6-UFDFN
    2-3 Days
    Add Compare
  • FSA1157P6X
    ON Semiconductor
    598-FSA1157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • DG413DY-E3
    Vishay Siliconix
    880-DG413DY-E3
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • FSA1256L8X
    ON Semiconductor
    598-FSA1256L8X
    8-UFQFN
    2-3 Days
    Add Compare
  • FSA1256AL8X
    ON Semiconductor
    598-FSA1256AL8X
    8-UFQFN
    2-3 Days
    Add Compare
  • DG408DJ
    Vishay Siliconix
    880-DG408DJ
    16-DIP (0.300, 7.62mm)
    2-3 Days
    Add Compare
  • DG442DY
    Vishay Siliconix
    880-DG442DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG445DY
    Vishay Siliconix
    880-DG445DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG271BDY
    Vishay Siliconix
    880-DG271BDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG408LDY
    Vishay Siliconix
    880-DG408LDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG406DN
    Vishay Siliconix
    880-DG406DN
    28-LCC (J-Lead)
    2-3 Days
    Add Compare
  • FSA4157L6X
    ON Semiconductor
    598-FSA4157L6X
    6-UFDFN
    2-3 Days
    Add Compare
  • DG428DN
    Vishay Siliconix
    880-DG428DN
    20-LCC (J-Lead)
    2-3 Days
    Add Compare
  • DG613DY
    Vishay Siliconix
    880-DG613DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG642DY
    Vishay Siliconix
    880-DG642DY
    8-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG411DY-T1
    Vishay Siliconix
    880-DG411DY-T1
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
index:  0 - 9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
Settings Need Help?
Top FAQ's

How can I quickly find answers to my questions?

Please visit the Help & Support area of our website to find information regarding ordering, shipping, delivery and more.

What is my Order Status?

Registered users can track orders from their account dropdown, or click here. *Order Status may take 12 hours to update after initial order is placed.

How do I return product?

Users can begin the returns process by starting with our Returns Page.

How do I find price and availability?

Quotes can be created by registered users in myLists.

How do I create a 'HK JDW' Account?

Visit the Registration Page and enter the required information. You will receive an email confirmation when your registration is complete.

United Kingdom/GBP Summary
Fast Shipping Fast Delivery

Orders are typically delivered to United Kingdom within 48 hours depending on location.

Free Shipping Free Shipping

Free delivery to United Kingdom on orders of £33 or more. A delivery charge of £12 will be billed on all orders less than £33.

Incoterms Incoterms

DDP (Duty and customs paid by HK JDW)

Payment Options Payment Types

Credit account for qualified institutions and businesses

Payment in Advance by Wire Transfer

Visa Mastercard American Express PayPal Apple Pay Google Pay

Marketplace Marketplace Product

More Products From Fully Authorized Partners

Average Time to Ship 1-3 Days, extra ship charges may apply. Please see product page, cart, and checkout for actual ship speed.

Incoterms: CPT (Duty, customs, and applicable VAT/Tax due at time of delivery)

For more information visit Help & Support