Call us: +86 0755-82563503

Currency: $ US Dollar

Items : %s%s

  • DG201BDY-T1-E3

DG201BDY-T1-E3

advertisement

Manufacturer No:

DG201BDY-T1-E3

Manufacturer:

Vishay Siliconix

HK JDW NO:

880-DG201BDY-T1-E3

Package:

16-SOIC (0.154, 3.90mm Width)

Datasheet:

DG201BDY-T1-E3

Description:

300ns, 200ns SPST - NC 85Ohm Analog Switches BREAK-BEFORE-MAKE DG201 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Quantity:

In Stock : 999

Share

Please send RFQ, we will respond immediately.

* Contact Name

* Business Email

* Company Name

* Country

* Quantity

Product Details

Purchasing and Inquiry

DG201BDY-T1-E3 Overview


Shipping overseas is convenient due to the electrical component's packing in 16-SOIC (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 1:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. Into the electrical component body are injected 16 pins. These analog multiplexers are built based on SPST - NC switching circuits. Try searching for the analog switch ic with DG201 if you are looking for variants. There is 160Ohm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 25V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended that the electrical component receives a voltage of 4.5V. This multiplexer would work with 50μA current. The analogue multiplexer may be damaged if voltage is greater than 50μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. It is recommended that you attach at least 4.5V to your dual power supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. There is a voltage range of 24V operating voltages for the electrical part. It is possible to operate 4 inputs. Drain to Source resistance is 85Ohm.

DG201BDY-T1-E3 Features


1 Channels
Switch Circuit: SPST - NC
50μA Supply Current
Drain-to-Source resistance: 85Ohm

DG201BDY-T1-E3 Applications


There are a lot of Vishay Siliconix DG201BDY-T1-E3 Analog Switches & Multiplexers ICs applications.

  • Signal routing between systems
  • CSU
  • Video switching
  • Audio signal routing
  • MP3 players
  • SONET/SDH ADM
  • 65 V DACs
  • Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
  • Fiber to the Home
  • Mechanical reed relay replacement
1. Purchase

You can send an inquiry by email, or add the item to the RFQ list and submit it to us.
Tell us the model and quantity you need, our sales staff will reply the price in time.
EmailEmail for receiving inquiries: jindawei@hkjdwchip.com

2. Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

3. RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

4. Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:
FedEx International, 5-7 business days.
The following are some common countries' logistic time.

Purchasing and Inquiry

Payment Method

The fee is charged according to the rule of PayPal.
East West Bank charge US$30.00 banking fee.
The fee is charged according to the rule of PayPal.
Western Union charge US$0.00 banking fee.

Shipping

DHL(www.dhl.com)
From $40.00 basic shipping fee depend on zone and country.
UPS(www.ups.com)
From $40.00 basic shipping fee depend on zone and country.
FedEx(www.fedex.com)
From $40.00 basic shipping fee depend on zone and country.
Registered Mail(www.singpost.com)
From $10.00 basic shipping fee depend on different zone and country.

Package

Product
Step1Product
Casing drivepipe
Step2Casing drivepipe
Anti-static bag
Step3Anti-static bag
Packaging boxes
Step4Packaging boxes
Bar-code shipping tag
Step5Bar-code shipping tag

DG201BDY-T1-E3

technical specifications, attributes, parameters and parts with similar specifications to DG201BDY-T1-E3.

  • Type
    Parameter
    Select All
  • Charge Injection

    1pC

  • Channel-to-Channel Matching (ΔRon)

    2 Ω

  • Crosstalk

    -95dB @ 100kHz

  • Switching

    BREAK-BEFORE-MAKE

  • Drain to Source Resistance

    85Ohm

  • Normal Position

    NC

  • Height

    1.55mm

  • Length

    10mm

  • Width

    4mm

  • Radiation Hardening

    No

  • REACH SVHC

    Unknown

  • RoHS Status

    ROHS3 Compliant

  • Lead Free

    Lead Free

  • Factory Lead Time

    13 Weeks

  • Mount

    Surface Mount

  • Mounting Type

    Surface Mount

  • Package / Case

    16-SOIC (0.154, 3.90mm Width)

  • Number of Pins

    16

  • Weight

    665.986997mg

  • Operating Temperature

    -40°C~85°C TA

  • Packaging

    Tape & Reel (TR)

  • Published

    2016

  • JESD-609 Code

    e3

  • Pbfree Code

    yes

  • Part Status

    Active

  • Moisture Sensitivity Level (MSL)

    1 (Unlimited)

  • Number of Terminations

    16

  • Resistance

    160Ohm

  • Terminal Finish

    Matte Tin (Sn)

  • Subcategory

    Multiplexer or Switches

  • Max Power Dissipation

    640mW

  • Technology

    CMOS

  • Terminal Form

    GULL WING

  • Peak Reflow Temperature (Cel)

    260

  • Number of Functions

    4

  • Supply Voltage

    15V

  • Terminal Pitch

    1.27mm

  • Time@Peak Reflow Temperature-Max (s)

    40

  • Base Part Number

    DG201

  • Output

    SEPARATE OUTPUT

  • Pin Count

    16

  • Operating Supply Voltage

    24V

  • Power Supplies

    12/+-15V

  • Number of Channels

    1

  • Max Supply Voltage

    25V

  • Min Supply Voltage

    4.5V

  • Operating Supply Current

    50μA

  • Nominal Supply Current

    100μA

  • Power Dissipation

    640mW

  • Max Supply Current

    50μA

  • Throw Configuration

    SPST

  • Turn On Delay Time

    300 ns

  • Number of Inputs

    4

  • Voltage - Supply, Single/Dual (±)

    4.5V~25V ±4.5V~22V

  • Supply Type

    Dual, Single

  • Neg Supply Voltage-Nom (Vsup)

    -15V

  • Turn-Off Delay Time

    200 ns

  • Max Dual Supply Voltage

    22V

  • On-State Resistance (Max)

    85Ohm

  • Min Dual Supply Voltage

    4.5V

  • Dual Supply Voltage

    9V

  • Multiplexer/Demultiplexer Circuit

    1:1

  • Off-state Isolation-Nom

    90 dB

  • Current - Leakage (IS(off)) (Max)

    500pA

  • Channel Capacitance (CS(off), CD(off))

    5pF 5pF

  • On-state Resistance Match-Nom

    2Ohm

  • Switch Circuit

    SPST - NC

  • Switch Time (Ton, Toff) (Max)

    300ns, 200ns

Hot Sales in Thermal

74HC4051

74HC4051

74HC4051

ISL43L712IRZ

ISL43L712IRZ

ISL43L712IRZ

ADG1604BRUZ-REEL7

ADG1604BRUZ-REEL7

ADG1604BRUZ-REEL7

MAX4636EUB+

MAX4636EUB+

MAX4636EUB+

MAX4613EUE

MAX4613EUE

MAX4613EUE

SN74LVC1G3157YZPR

SN74LVC1G3157YZPR

SN74LVC1G3157YZPR

MAX4658ESA+

MAX4658ESA+

MAX4658ESA+

ADG1202BRJZ-R2

ADG1202BRJZ-R2

ADG1202BRJZ-R2

HI9P0509-5Z

HI9P0509-5Z

HI9P0509-5Z

ADG701BRJ-REEL7

ADG701BRJ-REEL7

ADG701BRJ-REEL7

Parts with Similar Specs

The three parts on the right have similar specifications to Aavid.

  • Image
    Part Name
    Manufacturer
    HK JDW NO
    Package
    Stock
    DataSheet:
    Compare:
  • FSA266K8X
    ON Semiconductor
    598-FSA266K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • NC7WB66K8X
    ON Semiconductor
    598-NC7WB66K8X
    8-VFSOP (0.091, 2.30mm Width)
    2-3 Days
    Add Compare
  • NC7SB3157P6X
    ON Semiconductor
    598-NC7SB3157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • FSA4157P6X
    ON Semiconductor
    598-FSA4157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • FSA3157L6X
    ON Semiconductor
    598-FSA3157L6X
    6-UFDFN
    2-3 Days
    Add Compare
  • FSA1157P6X
    ON Semiconductor
    598-FSA1157P6X
    6-TSSOP, SC-88, SOT-363
    2-3 Days
    Add Compare
  • DG413DY-E3
    Vishay Siliconix
    880-DG413DY-E3
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • FSA1256L8X
    ON Semiconductor
    598-FSA1256L8X
    8-UFQFN
    2-3 Days
    Add Compare
  • FSA1256AL8X
    ON Semiconductor
    598-FSA1256AL8X
    8-UFQFN
    2-3 Days
    Add Compare
  • DG408DJ
    Vishay Siliconix
    880-DG408DJ
    16-DIP (0.300, 7.62mm)
    2-3 Days
    Add Compare
  • DG442DY
    Vishay Siliconix
    880-DG442DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG445DY
    Vishay Siliconix
    880-DG445DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG271BDY
    Vishay Siliconix
    880-DG271BDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG408LDY
    Vishay Siliconix
    880-DG408LDY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG406DN
    Vishay Siliconix
    880-DG406DN
    28-LCC (J-Lead)
    2-3 Days
    Add Compare
  • FSA4157L6X
    ON Semiconductor
    598-FSA4157L6X
    6-UFDFN
    2-3 Days
    Add Compare
  • DG428DN
    Vishay Siliconix
    880-DG428DN
    20-LCC (J-Lead)
    2-3 Days
    Add Compare
  • DG613DY
    Vishay Siliconix
    880-DG613DY
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG642DY
    Vishay Siliconix
    880-DG642DY
    8-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
  • DG411DY-T1
    Vishay Siliconix
    880-DG411DY-T1
    16-SOIC (0.154, 3.90mm Width)
    2-3 Days
    Add Compare
index:  0 - 9  A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z
Settings Need Help?
Top FAQ's

How can I quickly find answers to my questions?

Please visit the Help & Support area of our website to find information regarding ordering, shipping, delivery and more.

What is my Order Status?

Registered users can track orders from their account dropdown, or click here. *Order Status may take 12 hours to update after initial order is placed.

How do I return product?

Users can begin the returns process by starting with our Returns Page.

How do I find price and availability?

Quotes can be created by registered users in myLists.

How do I create a 'HK JDW' Account?

Visit the Registration Page and enter the required information. You will receive an email confirmation when your registration is complete.

United Kingdom/GBP Summary
Fast Shipping Fast Delivery

Orders are typically delivered to United Kingdom within 48 hours depending on location.

Free Shipping Free Shipping

Free delivery to United Kingdom on orders of £33 or more. A delivery charge of £12 will be billed on all orders less than £33.

Incoterms Incoterms

DDP (Duty and customs paid by HK JDW)

Payment Options Payment Types

Credit account for qualified institutions and businesses

Payment in Advance by Wire Transfer

Visa Mastercard American Express PayPal Apple Pay Google Pay

Marketplace Marketplace Product

More Products From Fully Authorized Partners

Average Time to Ship 1-3 Days, extra ship charges may apply. Please see product page, cart, and checkout for actual ship speed.

Incoterms: CPT (Duty, customs, and applicable VAT/Tax due at time of delivery)

For more information visit Help & Support