LM1117MPX-3.3/NOPB Overview

A Tape & Reel (TR) case is used to deliver the Voltage Regulated IC. This battery regulator is contained in a TO-261-4, TO-261AA package. On the Voltage regulator IC, there are 4 terminations that can be connected. This PMIC chip has an output type of Fixed. This part implements 1 regulator ICs, which can be found in the following table. Regulator IC varies the range of Surface Mount operating temperatures. The IC Regulator is set to operate at 0°C~125°C degrees. This regulator's output function is configured to be Positive. A total of 3 pins are located on this chip, making it the size of a standard chip. This IC regulator has a total of 1 outputs, which ensures a rapid, adequate performance when in use. This voltage regulator IC has a dropout voltage of 10 volts. Several pins on the chip are 4-shaped. For your information, the basic part number for this regulator IC is LM1117. This regulator IC is a typical Other Regulators. Packing the voltage regulator IC in this way is called TR packing. There is a maximum output current of 800mA for this regulator to meet the operational requirements. It operates in the 10mA Quiescent Current state. As part of the LM1117-3.3 Series, this IC voltage regulator belongs to that category.

LM1117MPX-3.3/NOPB Features

1.2V dropout voltage
Other Regulators subtageroy
TR method of packing

LM1117MPX-3.3/NOPB Applications

There are a lot of Texas Instruments LM1117MPX-3.3/NOPB Linear Voltage Regulators applications.

FPGA power
Automated test equipment
Automotive applications
IO devices
Digital audio player
Analog control systems
EPS (Electric Power Steering)
Video equipment
Bypass circuit
Low-voltage microprocessor power supplies

In Stock : 5590