PQ1X331M2ZPH Overview

A Tape & Reel (TR) case is used to deliver this IC regulator. In SC-74A, SOT-753 cases, it is packaged. In terms of output type, Fixed is what the Regulator IC produces. A total of 1 regulators are implemented in this eletric component. The Linear Voltage Regulator's mounting type is Surface Mount. The IC Regulator is set to operate at -30°C~85°C degrees. As you can see, this regulator's output function is configured to be Positive. There is an output current of 150mA on this regulator. The part includes 1 outputs in order to ensure that the voltage regulator IC performs effectively and in a timely manner. There is a dropout voltage of 10 volts on this IC regulator. Depending on the chip, 5 pins may be available. There is a maximum output current of 150mA for this regulator to meet the operational requirements. It operates in the 200μA Quiescent Current state. As a general rule, it is recommended that you use the IC voltage regulator when temperatures are below 80°C degrees Celsius. At the lowest operating temperature that can be reached by the chip, it is -30°C.

PQ1X331M2ZPH Features

200mV dropout voltage
The maximum operating temperature of -30°C

PQ1X331M2ZPH Applications

There are a lot of Sharp Microelectronics PQ1X331M2ZPH Linear Voltage Regulators applications.

Portable medical devices
Smartcard
Smart buildings
Arduino servo control
Battery-powered device
Fuel injector
TVS diodes
FPGA power
Position detection
Motorcycle

In Stock : 13063