PQ1R33J0000H Overview

In the case of Tape & Reel (TR) cases, the regulater IC is delivered. The Liner regulator IC is packaged in SOT-23L-6 case. Regulator IC chip's output type is Fixed. This electronic component implements 1 regulators. Variations are made to the Surface Mount operating temperature range by the Voltage Regulator IC. -30°C~80°C degrees is the operating temperature of the Voltage Regulator IC. There is a configuration in this voltage regulator IC that specifies that its output function is Positive. Its current output stands at 150mA. To ensure prompt, sufficient performance, this part features 1 outputs in total. The dropout voltage of the regulator IC is 10 volts. There are 6 pins on the chip. It works in 150mA output current at mostIt operates in the 350μA Quiescent Current state. You should use the regulator IC when the temperature is below 80°C. The chip is operated at a maximum operating temperature of -30°C.

PQ1R33J0000H Features

290mV dropout voltage
The maximum operating temperature of -30°C

PQ1R33J0000H Applications

There are a lot of Sharp Microelectronics PQ1R33J0000H Linear Voltage Regulators applications.

Motorcycle
Timing and clock ICs
Engine cooling fan
IO devices
Gateway module
Automated test equipment
Ethernet condition monitoring vibration sensor
Motor controllers
PLL (Phase-Locked Loop)
FPGA power

In Stock : 7405