PQ1M335M2SPQ Overview

A Tape & Reel (TR) case is used to deliver this IC regulator. A SOT-89-5/6 case is used for packaging. This IC Regulator has a type of output called Fixed. This part implements 1 regulator ICs, which can be found in the following table. Surface Mount can be adjusted in the Linear IC in order to vary the temperature range over which Linear Regulator operates. In order for this IC voltage regulator to operate, the temperature has to be kept at -30°C~85°C degrees. It has been configured that the output function of this IC regulator is Positive. The current output of this IC regulator is 500mA. There are 1 outputs total on this voltage regulator IC in order to ensure that prompt and sufficient performance is achieved. As far as its dropout voltage is concerned, it is 10 volts. On the chip, there are pins for the 5 axis. The regulator operates with a maximum operating temperature of 85°C. The chip's operating temperature cannot be lowered below -30°C.

PQ1M335M2SPQ Features

400mV dropout voltage
The maximum operating temperature of -30°C

PQ1M335M2SPQ Applications

There are a lot of Sharp Microelectronics PQ1M335M2SPQ Linear Voltage Regulators applications.

Home electric appliance
Temperature monitoring
Ethernet condition monitoring vibration sensor
Power generator plants
Desktop microcomputer systems
Automated test equipment
HMI (Human-Machine Interface)
Car lighting
Low-voltage microprocessor power supplies
Vibration sensor

In Stock : 9809