NCP3011DTBR2G Overview

Capsuled in the 14-TSSOP (0.173, 4.40mm Width) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 4.7V~28V. A -40°C~125°C TJ dc switcher is not a problem. In this switching controller, the switch can be set to 400kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Enable, Power Good is included in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 14 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. A search for "NCP3011" will reveal other relevant dc to dc converter ics. There are 14 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended to use 4.7V as the minimum input voltage of dc dc voltage regulator. Statistically, DC regulator outputs 40V volts. The dc to dc regulator is limited to 28V input voltage. You should note that the dc dc regulator's usual output current is 70μA. Voltage regulator dc to dc is designed to operate at 83 % duty cycle during power-ups and power-downs to ensure reliability. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sDC regulators have a maximum frequency of 470kHz. As a result, DC to DC voltage regulator has a value of ADJUSTABLE OUTPUT VOLTAGE DOWN TO 0.8V so that the need can be met more directly. The supply current is 8mA. If the current exceeds 12mA, the component may not operate correctly and may even be damaged.

NCP3011DTBR2G Features

Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 83 %
ADJUSTABLE OUTPUT VOLTAGE DOWN TO 0.8V

NCP3011DTBR2G Applications

There are a lot of ON Semiconductor NCP3011DTBR2G DC to DC converter applications.

Telecommunications equipment
Hydrogen power
Medical equipment
USB circuits
Terrestrial set-top boxes
Bending machines
Smoke exhaust equipment
Radio equipment
Post equipment
Industrial controllers

In Stock : 2