MP2918GF-Z Overview

The switching controller fits in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. PWM Signal dc switching's outputs (s) can be handled by it. 4V~40V is the supply voltage and the operating voltage of the dc control. Worked in a -40°C~125°C TJ dc switcher before. Using this switching controller, it is possible to switch at 100kHz~1MHz. The Surface Mount allows it to be used for dc dc regulator in general. To ensure efficient switching, this dcdc regulator features a Enable, Frequency Control, Power Good, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminals (s) are designed at DUAL. There are many different types of terminations for 20. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's voltage input is 12V. It is recommended to use 4V as the minimum input voltage of dc dc voltage regulator. It should be fully noted that the dc to dc regulator only accepts 40V input voltage at most. The value of DC to DC voltage regulator is set to REGULATING OUTPUT VOLTAGE MAX IS 25 in order to better satisfy the requirement.

MP2918GF-Z Features

PWM Signal Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
REGULATING OUTPUT VOLTAGE MAX IS 25

MP2918GF-Z Applications

There are a lot of Monolithic Power Systems Inc. MP2918GF-Z DC to DC converter applications.

Refrigerators of central air conditioners
Hydro power
Cutting machine tools
Ball screw pair
Product testing
Network technology
Motor controller circuits
Flexible manufacturing cells
Grinders
Sink circuits

In Stock : 2069