MCP1316T-29AE/OT Overview

A Cut Tape (CT) package is used to package the power management. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. There are 5 pins on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supply current of the power management is 10μA. A similar IC managements number of the manufacturer can always be found by using MCP1316, the base power ics number. A maximum supply temperature of 10μA can be used.

MCP1316T-29AE/OT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current

MCP1316T-29AE/OT Applications

There are a lot of Microchip Technology MCP1316T-29AE/OT Voltage Supervisors applications.

Display equipment
Analog circuit
Embedded computing
Detection of phase loss
Household appliances
Utility meter
Smart meter
Transformer load monitoring equipment
Multi-voltage system
Microcontroller system

In Stock : 296