MAX8215CPD+ Overview

This voltage supervisor has a total of 14 mounting terminals that can be used for mounting. There is a Tube-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. A series of 5 channels can be found on this supervisor. To assist you, this PMIC includes 14-DIP (0.300, 7.62mm) functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 245 for the package during reflow. In a 5V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 5. By Through Hole, IC management has been mounted. In total, IC powers are 14 pins on the board. Pin count of the power management is 14. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 2.7V, which is the minimum supply voltage that should be applied. There should be no more than 11V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Through Hole type of mounting. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. The supervisor's supply current is specified to 250μA. To find similar IC managements from the manufacturer, you can always search by MAX8215. A maximum supply temperature of 250μA can be used with this power management.

MAX8215CPD+ Features

Multi-Voltage Supervisor type
Minimum supply voltage of 2.7V
250μA operating supply current

MAX8215CPD+ Applications

There are a lot of Maxim Integrated MAX8215CPD+ Voltage Supervisors applications.

Set top box
Consumer electronics
Radar
Household appliances
Utility meter
Battery cars
DSP
Rechargeable batteries
Radio
Cloud computing

In Stock : 101