MAX6710JUT+T Overview

This power management consists of 6 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. There are a total of 4 channels on this supervisor, and they are arranged in a series. There are SOT-23-6 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. IC management conducts in a 2.5V-voltage supply. Power ics operate at 4 supply voltages. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. A total of 6 pins are located on this power management. There are 6 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6710, which is the base power ics number. This power management requires 2.5/5V power to work.

MAX6710JUT+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V

MAX6710JUT+T Applications

There are a lot of Maxim Integrated MAX6710JUT+T Voltage Supervisors applications.

Electric heating appliances
Household appliances
Rechargeable batteries
Automotive permanent magnet synchronous motors
Medical-specific insulation monitor
Medical-specific isolation transformer
Military communications
Microcontroller system
DVR
Kitchen appliances

In Stock : 31817