MAX1229BCEP+ Overview

The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 20-SSOP (0.154, 3.90mm Width) package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 20 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 3V.The A/D converter has 12 channels.The is equipped with 20 pin count.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at 0°C~70°C.The number of samples of audio recorded every second is 300k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for TRACK time.The architecture that analogue to digital converter's core adopts is SAR.There are 20 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The supply/analog voltage of this electrical ADC converter is 2.7V~3.6V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to MAX1229 family.This electrical digital converter is lead free, which means made without lead, or has no lead added to it.There are several types of supply, categorized by Single.The supply/digital voltage of this electrical AD converter is 2.7V~3.6V.Surface Mount is a device that can be mounted on the digital converter.The ADC converter operates with the maximal supply voltage of 3.6V.6, 12 inputs are employed.It operates with the minimal supply voltage of 2.7V.The ADC converter operates from 3/3.3V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 1.86mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 727mW.The conversion rate of this electrical AD converter is calculated as 300 ksps.There are 1 A/D converters, which are used to convert an analog signal like voltage to digital form so that it can be read and processed by a microcontroller. Temperature Sensor can be ensured when operating.The reference voltage amounts to 2.5V.

MAX1229BCEP+ Features

1 Functions
20 basic kinds of terminations
20 pin count
Minimal supply voltage of 2.7V
3/3.3V power supplies

MAX1229BCEP+ Applications

There are a lot of Maxim Integrated MAX1229BCEP+ ADC applications.

Battery Operated Systems
Micro and pico cell systems, software radios
Data Acquisition Systems
TD-SCDMA, WiMAX
Communication test equipment
Medical Instrumentation and medical imaging
Spectrum Analysis
Smart antenna systems
4-channel data acquisition
Scientific instruments

In Stock : 36