EPC1441PI8 Overview

An interesting 8-DIP (0.300, 7.62mm) package is used.Packaging for Tube.-40°C~85°C-qualified.OTP is the program that allows it to be programmed.FPGA is fed wFPGAh a voltage of 3V~3.6V 4.5V~5.5V.There is a memory device mounted in Through Hole.FPGA is limFPGAed to 440kb bytes for the size of the data storage.Look for "EPC1441" for other related parts.Supply voltage 3.3V is required.Different functions are associated with 8 terminations.With 3.6V as the maximum voltage, the memory device can be used.If the device needs to be supplied with power, then a minimum voltage of 3V is required.A CONFIGURATION MEMORY memory chip is shown here.Reflow soldering should be done at no higher than NOT SPECIFIED degrees.A SERIAL-processing method is used to transfer data through this memory.The memory chip will not operate at a voltage above 0.03mA.Taking the speed of the IC into consideration, this is a memory IC that can work at a frequency of 10MHz.As far as memory I/O is concerned, it is configured as COMMON.A power supply that is rated at 3.3/5V is recommended for use with this product.Therefore, IT CAN ALSO OPERATE AT 5V SUPPLY is included in order to better meet customer needs.A EPC series device, it belongs to the EPC family.

EPC1441PI8 Features

Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.

EPC1441PI8 Applications

There are a lot of Intel EPC1441PI8 applications of configuration proms for FPGAs.

Camcorders
servers
telecommunications
main computer memory
hard disk drive (HDD)
printers
embedded logic
networks
data buffer
cell phones

In Stock : 4138